New Mini-ITX Motherboard H87E-ITX/ac from ASRock

ASRock, a Taiwanese manufacturer of motherboards, is eager to introduce its new elaboration – motherboard H87E-ITX/ac. The new-comer is designed in a compact mini-ITX form-factor and is destined for the creation of compact desktop systems. Chipset Intel H87 Express in combination with Intel Core (4th generation) LGA 1150 processors provide for utmost stability and high performance in the majority of working modes.



ASRock H87E-ITX/ac houses two slots for RAM memory modules of DDR3 type; the maximal volume of supported memory might achieve 32 GB. The board takes power by means of 24-pin ATX and 8-pin EPS connectors. Digi Power system, featuring DrMOS voltage regulators, allots four phases for providing power supply to the CPU. Expansion of facilities becomes possible due to a single PCI Express 3.0 x16 slot, a single miniPCI Express slot, a single eSATA port, and six SATA III 6 Gb/sec ports.


Network facilities are guaranteed by gigabit Ethernet port, Bluetooth 4.0 module, …

Thermalright Readies Le Grand Macho Passive Cooler

Thermalright decided to gladden all devotees of ultra-quiet PC systems by designing an efficient passive cooler – Le Grand Macho. This is a conventional tower cooler, supporting new and outdated CPUs of up to 95 W TDP. Hence, the greenhorn is compatible with Intel LGA 775/115x/1366/2011/2011-3 as well as AMD FM2/FM2+/FM1/AM2/AM2+/AM3/AM3+ platforms.



Initially, Thermalright Le Grand Macho is void of any fan; nonetheless, its framework presupposes the installation of one or two high-efficiency fans (120/140 mm), which are able to cope with 300-watt CPUs.


The cooler consists of a nickel-plated base, seven heatpipes and a voluminous aluminum heatsink with 35 fins. The latter come with perforations which counteract air between the plates with low air resistance. The base features a convex-shaped contact surface (that optimizes cooling efficiency) and is perfectly polished. Seven 6-mm heatpipes are solidly integrated into the base, ensuring ideal heat dissipation.


The …

ID-Cooling Hunter Duet II Liquid Cooling System

ID-Cooling, being famous for its cooling systems, has released a Hunter Duet II cooler of large dimensions, which is supposed to transfer heat from the CPU and the graphics engine surfaces. This model is designed with a 360 mm heat sink, which is of great benefit to its efficiency factor.



The construction includes two water units with a base out of copper and built-in pumps, pipes in braided cable, the three-section aluminum 395 × 120 × 27 mm heat sink, three 120 mm fans, and an extraordinary framework with a 90 mm fan to blow over graphics card load-bearing elements and intensive plates for the CPU and GPU.


Though possessing similar construction, water units differ in lids design and the location of holes for liquid flow. At the moment their inner structure details are not available.

A compact fan to blow over VRM consumes 1.2 W. Its rotary speed is not higher than 1,500 rpm. The same ratio of each of the three main fans is not supposed to exceed 1,500–2,000 rpm.

AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 07 March 2012, 07:31
Last visit: 07 March 2012, 07:41