Cooler Master Showcases G-Series PSUs



Along with the launch of new PC chassis, Cooler Master is ready to release new G-series power supply units. The series is introduced by three models – G500, G600 and G700 – with 500W, 600W and 700W power, respectively. All of them correspond to ATX12V v2.3 standard, support Active PFC option and a range of protection tools (from short circuit, overvoltage, current overload, power overload). Moreover, these units employ a dual EMI-filter and take benefit from a single 120 mm fan with automatic speed control functions.


Cooler Master G-series PSUs have been felicitated with 80Plus Bronze certificate, due to their high efficiency (approximately 85%) and an estimated mean time between failures of 100.000 hours. The two junior models, G500 and G600, are able to operate at 456W and 576W load, correspondingly, on +12V rail. They are quipped with six SATA Power sockets and a pair of PCI Express Power 6+2-pin sockets. G500 unit will come to the market at the price of €60, while …

Zotac GeForce 640 GT: Kepler for $ 100

The emergence of a new GPU architecture does not only make records in the performance of high-end graphics cards, but often changes the idea of what to expect from an inexpensive card with a low TDP. Let see what can offer GT 640 — associate member of the family Kepler



The lower segment of the GeForce 600 is already fully staffed. In retail, there are cards GT 610, GT 620, GT 630 and GT 640, and in the OEM- channels additionally supplied GeForce 605. But among all of them, only GT 640 can be called a fully new model, since it is based on the architecture of Kepler, and the remaining cards are a familiar model series GeForce 400 and GeForce 500 Architecture (Fermi) with certain minor modifications.


GeForce 640 is based on the GK107 chip, which previously debuted in accelerators GeForce 640M. The performance of the last was comprehensively studied on the laptop Acer Aspire M3-581TG: compared to the GeForce 540M new chip provides a very nice speed boost. GK107 contains one …

ID-Cooling Hunter Duet II Liquid Cooling System

ID-Cooling, being famous for its cooling systems, has released a Hunter Duet II cooler of large dimensions, which is supposed to transfer heat from the CPU and the graphics engine surfaces. This model is designed with a 360 mm heat sink, which is of great benefit to its efficiency factor.



The construction includes two water units with a base out of copper and built-in pumps, pipes in braided cable, the three-section aluminum 395 × 120 × 27 mm heat sink, three 120 mm fans, and an extraordinary framework with a 90 mm fan to blow over graphics card load-bearing elements and intensive plates for the CPU and GPU.


Though possessing similar construction, water units differ in lids design and the location of holes for liquid flow. At the moment their inner structure details are not available.

A compact fan to blow over VRM consumes 1.2 W. Its rotary speed is not higher than 1,500 rpm. The same ratio of each of the three main fans is not supposed to exceed 1,500–2,000 rpm.

AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 23 February 2012, 21:51
Last visit: 27 July 2012, 16:13