The First Take on Versa N23 Chassis from Thermaltake

Thermaltake PC cases have never been a frustration. The Versa N23 is not an exception. It is a combination of functionality balanced with modern styling and a bit of company’s passion. The middle-tower chassis draws attention by the front panel with light-blue insertions against black panel. The other attraction is the right-side panel with an integrated acrylic window.

Thermaltake Versa N23 is intended to accommodate mini-ITX, micro-ATX and ATX motherboards with the maximum of 7 expansion slots. The availability of ODD bays enables the installation of two 5.25-inch drives. The layout also welcomes five 3.5-/2.5-inch drives which might be mounted without any tools.

Internal space is enough for 160-mm high CPU coolers, PS/2 ATX power supply units and 250-mm long graphics cards. If retrieving unnecessary drive bays from the bottom section, there is a chance to install 360-mm long videocards.

To continue, air cooling configuration offers 5 seats for 120 mm fans (2x …

Arctic Cooling Unveils New Freezer i32 & A32 CPU Coolers

Arctic Cooling AG replenishes its line of CPU coolers with a couple of new-comers. The Freezer i32 and the Freezer A32 feature analogous dimensions (123x95x150 mm), but are targeting to work with different platforms. The first model is compatible with Intel Socket LGA 2011 and 115x platforms, whereas the second version is predestined for the CPUs targeting AMD AM2/AM2+, AM3/AM3+, FM1 and FM2 platforms.

Arctic Cooling Freezer i32 & A32 consist of an aluminum heatsink with 45 thin plates and four U-shaped 6-mm copper heatpipes which support direct touch technology. It goes without saying that these coolers come equipped with a fan. This is a 120 mm propeller that supports PWM technology; the latter enables the change of rotational speed from 0 to 1350 RPM. The maximal TDP level of the catered CPUs should not exceed 150 W.

A dedicated bearing technology with alloy/lubricant combination provides for a lower friction and higher heat dissipation efficiency. The nominal delivery …

MSI works on development on three Mini-ITX motherboards based on chipsets A85, B75, and Z77

During August, MSI will release the two motherboards LGA1155 form-factor Mini-ITX, based on chipset Intel B75 and Z77. The first is positioned as a budget solution, the second is, in addition to support of overclocking Ivy Bridge K factor, will offer enhanced power system, and integrated Wi-Fi adapter and Bluetooth. Before the start of retail sales APU A-Series/Trinity (October) they will be joined by Mini-ITX motherboard based on chipset AMD A85.

From the pair of tiny “motherboards” B75/Z77 the greatest interest is for last one. The full codename of the model — MSI Z77IA-E53.

The upcoming model has seven power phases of processor socket with elements DrMOS and tantalum capacitors, power connector EPS12V 8-pin, two slots for RAM DDR3 (up to 16 GB of RAM) and a slot PCI Express 3.0 x16. Also, there are two SATA ports with a throughput of 3 and 6 Gb / s, single eSATA and mSATA (3 Gb / s). Jack mini-PCIe 5 GT / s is located directly above the mSATA — the original …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 26 April 2012, 19:40
Last visit: 26 April 2012, 19:40