ViewSonic launches 27 "monitor VX2703mh-LED with a fast matrix

The monitor range of U.S. company ViewSonic is replenished with the product VX2703mh-LED. This is a rather large (27 ") widescreen display on the matrix TN + film, low-latency (3 ms GtG), LED backlight and democratic price tag — U.S. $ 300.



The resolution of 1920x1080 pixels suggests that VX2703mh-LED will be a big pixel. Like many other ViewSonic monitors, a new model has a sleek design. The stand allows adjusting the tilt of the display ranging from -3 ° to 16 °. There are stereo outputs 2x2 W, Mini-Jack socket for headphones and microphone, video input DVI-D, HDMI v1.3 and analog D-Sub. The power of display ranges from 17-23 watts in eco mode, up to 28-36 watts in normal mode. It supports standard mounting VESA 100x100 mm.


Among main characteristics are:

Maximum Contrast Ratio: 1200:1 (20 million to 1 dynamic);

maximum brightness of 300 cd / m ²;

viewing angles: 170 ° horizontal, 160 ° vertical;

screen coating: anti-glare, hardness 3H;

pixel …

Biostar Launches Hi-Fi Z97WE Motherboard for Audiophiles

Biostar, paying much attention to the needs of real audiophiles, has recently launched a new full-format ATX motherboard, entitled Hi-Fi Z97WE. As seen from the codename, the greenhorn is based on Intel Z97 Express chipset, showing compatibility with Intel Core i3/i5/i7 and Pentium processors (4th and 5th gen.) for Socket LGA1150. The model combines a variety of dedicated options, bringing multimedia experience to a new level. Despite the functional, the board comes at an affordable price of $143.



Biostar Hi-Fi Z97WE features 10-phase VRM subsystem and draws power via 24-pin ATX and 8-pin EPS connectors. The PCB accommodates four DIMM slots for DDR3 memory slots (up to 64 GB capacity), a pair of PCI-e 3.0 x16 slots, PCI-e 2.0 x1 and PCI slots. Storage functional is realized by means of six SATA 6 Gb/sec ports; they support RAID 0/1/5/10 configurations. In addition, the model employs 100% solid-state capacitors that ensure stability on overclocking, combined with a prolonged …

The Compulab IPC3 Mini-PC with Passive Cooling Goes for 693 USD

One of the latest products by Compulab is an IPC3 mini-PC, intended for industrial and commercial use. The lowest price of the basic model is 693 USD.



Outside dimensions of the framework are 160 х 190 х 40 mm. Due to its exterior construction the case provides overall passive cooling.


There’s a possibility to install 32 GB of RAM, a 2.5” storage drive, an M.2 2260 SSD and a couple of devices with an mSATA connector. The novelty features wireless interface adapters along with two USB 2.0, four USB 3.0, two Gigabit Ethernet, a DisplayPort 1.2, an HDMI 1.4a and an S/PDIF ports. However, special modules will be able to extend this set of connectors.


The Compulab IPC3 Mini-PC operates an Intel Kaby Lake CPU and is protected by the five-year manufacturer warranty.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 17 October 2011, 18:31
Last visit: 17 October 2011, 18:31