GeIL Officially Introduces Zenith S3 SSD Series

GeIL, which is known for its high-end memory modules, drives, and other PC components, is going to release a new SSD series, codenamed Zenith S3. The series will embrace three models of 60GB, 120GB and 240GB capacity. All of them will be developed in 2.5-inch form-factor and will employ SATA III 6Gb/sec interface. The differentiation between the models is seen not only in their capacities but also in their speed performance, the index of which will be uncovered below.



Zenith S3 line is based on MLC NAND flash-chips designed under 25 nm technological process. As for the speed characteristics, all models in the series prove to demonstrate the maximal performance on random Write operations (4KB) – up to 70000 IOPS. When touching upon sequential speeds, each model shows different indeces:

— GZ25S2L-60G: maximal sequential Read speed – 500MB/sec, maximal sequential Write speed – 480MB/sec (recommended price — $70);

— GZ25S3L-120G: maximal sequential Read speed – …

Greeting Small-Sized J1800I Motherboard from MSI

MSI has recently added J1800I model to its mini-ITX motherboards inventory. The new-comer features 170x170 mm dimensions and is characterized by a low power consumption level. This makes it a desirable acquirement for builders of small-sized, power-efficient PC systems and multimedia devices. The board boasts Military Class 4 design that involves high-quality hardware components, including Dark Chokes and solid-state capacitors.



MSI J1800I is based on Intel Celeron J1800 CPU (22 nm) that runs at 2.41 GHz frequency but might be overclocked to 2.58 GHz. It consumes only 10 W power, being cooled down by a single aluminum heatsink. The PCB accommodates two SO-DIMM slots for two-channel DDR3 memory modules with the maximum frequency of 1333 MHz and the maximum capacity of 8 GB.


To continue, the hardware inventory embraces two SATA II 3 Gb/sec ports for the connection of drives. The availability of one PCI Express 2.0 x 1 slot enables the connection of a supplementary expansion …

EK to Start Selling FC7970 Matrix Waterblock in Early March

EK Water Blocks is about to put on sale its VGA waterblock, designed specifically for Asus ROG Matrix HD 7970 graphics card. Codenamed EK-FC7970 Matrix, the product will become available in retail sale already on 8 March and will cost approximately €110. Such price is justified by the utmost heat management facilities that ensure 100% percent reliability.



EK-FC7970 Matrix belongs to the echelon of waterblocks with full coverage. Its base is made of nickel-plated copper, its rear backplate – of anodized aluminum, and its lid – of acetal. The model shows compatibility with all standard fittings of G1/4 dimensional type.


It should be mentioned that EK Water Blocks furnished its new creation with all necessary fastenings, a backplate, and a mounting plate; the latter takes only two slots, unlike a nominal Asus ROG Matrix HD 7970 plate which takes three slots. Such switch of plates will be useful on simultaneous installation of several expansion cards.


This …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Gender: Female
Registered at: 07 October 2011, 17:54
Last visit: 07 October 2011, 17:54