EK to Start Selling FC7970 Matrix Waterblock in Early March

EK Water Blocks is about to put on sale its VGA waterblock, designed specifically for Asus ROG Matrix HD 7970 graphics card. Codenamed EK-FC7970 Matrix, the product will become available in retail sale already on 8 March and will cost approximately €110. Such price is justified by the utmost heat management facilities that ensure 100% percent reliability.

EK-FC7970 Matrix belongs to the echelon of waterblocks with full coverage. Its base is made of nickel-plated copper, its rear backplate – of anodized aluminum, and its lid – of acetal. The model shows compatibility with all standard fittings of G1/4 dimensional type.

It should be mentioned that EK Water Blocks furnished its new creation with all necessary fastenings, a backplate, and a mounting plate; the latter takes only two slots, unlike a nominal Asus ROG Matrix HD 7970 plate which takes three slots. Such switch of plates will be useful on simultaneous installation of several expansion cards.

This …

They Did It! Official Release of AMD Radeon HD 7990 ‘Malta’

Much rumored reference graphics adapter from AMD has been recently officially introduced. As it was suggested before, Radeon HD 7990, codenamed ‘Malta’, employs two Tahiti XT2 GPUs, each of which contains 128 TMUs, 32 rasterization blocks (ROPs), and 2048 current processors (GCN architecture). Smooth work of both graphics cores is synchronized by means of PLX PEX8747 controller that supports 48 lines of PCI Express 3.0. Nominal clock frequencies ascribed to GPUs operation equal to 950 MHz, but Turbo mode enables the increase of frequencies up to 1000 MHz.

Video memory is represented by GDDR5 memory modules, the overall capacity of which equals to 6 GB (3 GB per each graphics core). Memory modules utilize 384-bit bus and run at 6000 MHz frequency with bandwidth of 288 Gb/sec per core. The incorporated PCB accommodates a single CrossFireX socket for the creation of various graphics configurations, including Quad-CrossFireX. Video interface panel boasts the availability of …

Palit to Release a Pair of GTX 1060 Video Cards

Palit is enlarging its lineup of GeForce GTX 1060 adapters with a pair of new models. The GTX 1060 Dual 3GB and the GTX 1060 StormX 3G are developed on Nvidia GP106-300 GPUs (16 FinFet), featuring 1152 CUDA cores, 72 TMUs & 48 ROPs. It runs at 1506/1708 MHz frequency (standard/dynamic). Both models are accompanied by 3 GB of GDDR5 memory (192-bit bus) that operates at 2000/8000 MHz frequency (standard/efficient).

The key differentiation between the models lies in the cooling system. Palit GeForce GTX 1060 StormX 3G is equipped with a single fan, replenished with a main heatsink and an additional one, housed on the power circuit. In its turn, Palit Geforce GTX 1060 Dual 3GB is fitted with a voluminous rectangular heat spreader, three copper heat pipes as well as two fans. Thus, it’s an ideal choice for overclockers.

Both video cards employ a single 6-pin connector to draw power. They feature a high-quality hardware base which counts solid-state capacitors, DrMOS chips, …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 19 April 2012, 20:39
Last visit: 19 April 2012, 20:39