ID-Cooling Hunter Duet II Liquid Cooling System

ID-Cooling, being famous for its cooling systems, has released a Hunter Duet II cooler of large dimensions, which is supposed to transfer heat from the CPU and the graphics engine surfaces. This model is designed with a 360 mm heat sink, which is of great benefit to its efficiency factor.



The construction includes two water units with a base out of copper and built-in pumps, pipes in braided cable, the three-section aluminum 395 × 120 × 27 mm heat sink, three 120 mm fans, and an extraordinary framework with a 90 mm fan to blow over graphics card load-bearing elements and intensive plates for the CPU and GPU.


Though possessing similar construction, water units differ in lids design and the location of holes for liquid flow. At the moment their inner structure details are not available.

A compact fan to blow over VRM consumes 1.2 W. Its rotary speed is not higher than 1,500 rpm. The same ratio of each of the three main fans is not supposed to exceed 1,500–2,000 rpm.

Deepcool is preparing a new cooler with heat pipes

Deepcool production company of inexpensive and quite efficient cooling systems has provided a sample of CPU cooler — Big Frost (tentative codename), which is an extension of current Frostwin model. Previous model has 4 sintered powder heatpipes, which conduct heat from the processor to protect it from overheating. Also, like a new model, it has 120mm fans.



New model has a simple design, but strict, almost «standard», forms will not prevent it from showing a decent performance. It works with less noise and performs an effective cooling. Big Frost consists of a nickel-plated copper base with a miniature auxiliary radiator, six U-shaped copper heatpipes, each of 6 mm in diameter, and two sections of aluminium plates of similar thickness. Pre-installed fans are running at different speeds. One turns with intensity of 1300 r / min (22.6 dB noise), the other — in the range from 900 to 1500 rev / min (21,4-32,1 dB).


Dimensions of construction form 126x136x159 mm, weight — …

Evga Unveils More Information about Z77 Mini ITX Motherboard

Last month Evga announced the release of its new motherboard of mini ITX form-factor based on Intel Z77 chip. Currently, there is no information concerning the exact release date, although the company keeps the suspense by providing more data about the future product. The motherboard will be codenamed Evga Z77 Mini ITX and will be compatible with LGA 1155 socket. The board will own unmatched properties to provide for the extreme overclocking facilities.



Evga Z77 Mini ITX is developed on eight-channel power supply subsystem that employs DrMOS IR3550M components. Additional power is supplied by 8-contact EPS12V socket. The motherboard is equipped with Marvell controller that takes responsibility for the operation of eSATA 6 Gb/sec interface on the rear panel. This interface is represented by a couple of eSATA ports. In addition, the rear panel accommodates video slot HDMI, Thunderbolt port, RJ-45 slot (gigabit Ethernet), optical S/PDIF, five Mini-Jack slots (under control of …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.43
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 13 September 2012, 06:28
Last visit: 13 September 2012, 06:28