Enermax to Announce a New Mid-Tower Case Fulmo ST

Enermax Technology, an established Taiwanese developer of various PC hardware components, is about to announce its new roomy PC case within the boundaries of Fulmo series. Codenamed Fulmo ST, the case is designed in mid-tower form-factor and is distinguished by massy dimensions. Featuring 485x244x513 mm, the product’s weight approximates 8.2 kg. The novice will be available in two color variations: gray (ECA3270A-G-BL) and black (ECA3270A-B-BL).

Fulmo ST is ready to accommodate up to eight PCI expansion cards, three 5.25-inch drives and eight drives either of 3.5- or 2.5-inch standard. The case is compatible with ATX and micro-ATX motherboards, quite lengthy graphics cards (up to 412 mm if demounting the top HDD/SSD bay), as well as rather lengthy dual-heatsink for the water-cooling system (up to 280 mm). The latter might be replenished by ten fans of either 120 mm or 140 mm dimensional type.

Upon the whole, Enermax will deliver its Fulmo ST case with three …

Monitor Asus PA248Q Review

The market of displays is full of models with the 16:9 height-to-width aspect ratio, what can't be said about 16:10 models which go in quite scant supply. Still, the latter are of great demand among computer enthusiasts. The inventory of monitors produced by Asus includes models of various height-to-width aspect ratio. Currently, the company is introducing exactly 16:10 product, codenamed PA248Q. The chief peculiarity of Asus PA248Q is seen in the availability of USB 3.0 hub that offers advanced facilities for customers.


Design of monitor Asus PA248Q greatly resembles that of its predecessor, PA246Q. The frontal panel contains a red stripe and vertical control buttons. The display is dull and void of loud dirtying. The swivel gear allows the customer to rotate the display 92 degrees clockwise. The stand contains measurement marks with digits that show the degree to which it's possible to raise or rotate the monitor. Vertical control buttons are located on the right …

Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.

New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.

The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Gender: Female
Date of birth: 14 November 1987
Registered at: 26 June 2012, 09:45
Last visit: 26 June 2012, 09:45