EKWB Launches a New Water Block for GV-N680SO-2GD

Early August of 2012 was marked for Gigabyte by the release of its one more graphics card, codenamed GeForce GTX 680 SOC (GV-N680SO-2GD). This card can boast the availability of high factory frequencies and quite mighty cooling system. The nominal frequencies have been heightened to 1137MHz, 1202MHz, and 6200MHz for memory. Such outstanding characteristics required the integration of a high-quality and high-performance cooling system which consisted of five(!) fans. This made the card rather voluminous, cumbersome and noisy. That was when EKWB decided to design a dedicated water block to be employed with this remarkable graphics adapter.

Water block EK-FC 680 GTX SOC is housed on a copper base, good-quality acetal cover, and rubber shims as a compressor. The model is delivered with pre-installed fixing stands to facilitate the installation. It should be noted that this water block entirely covers the frontal part of the graphics card, along with the adjacent RAM modules and …

MSI Shared the First Shot of Z170A Gaming Pro Mainboard

First displayed at Computex 2015, the Z170A Gaming Pro motherboard from MSI is now available for the web community. The company teases the first shot of the extended ATX model, showing off its main privileges. The new-comer is based on Intel Z170 chipset, intended for Socket LGA 1151-compatible Intel Skylake CPUs. Its key visual attraction is the availability of a stripe with RGB illumination on the right side. The stripe supports 8 working modes and is able to display up to 16.5 million colors.

MSI Z170A Gaming Pro comes equipped with 4x DIMM slots for the integration of DDR4-3300 MHz memory modules (maximum capacity – 64 GB). Storage subsystem is introduced by four SATA 6 Gb/sec ports and a single SATA Express port (compatible with two SATA 6 Gb/sec ports). The socket is powered by a 8-pin connector, whereas the PCB draws power from a 24-pin ATX one.

Furthermore, the connection of graphics cards might be realized via two PCIe 3.0 x16 slots; other expansion cards are …

PowerColor Teases Red Devil RX 480 Videocard

TUL Corporation is about to hit the market with an off-beat gaming graphics card, based on AMD Radeon RX 480 GPU. The PowerColor Red Devil RX 480 8 GB GDDR5 employs a retrofitted PCB with the 6+1-phase VRM. The board incorporates a single 8-pin connector, instead of a 6-pin one.

Like the etalon model, the creation from TUL uses the 4th-gen AMD GCN architecture & AMD Polaris 10 GPU. The integrated GPU features 2304 stream processors, 144 TMUs and 32 ROPs. Its clock frequency index makes up 1330 MHz. The core cooperates with 8 GB of GDDR5 memory (256-bit interface) that runs at 2000/8000 MHz frequency (base/efficient). The list of external interfaces boasts three DisplayPort ports, one HDMI and one DVI-D port.

The Red Devil RX 480 8 GB GDDR5 comes equipped with a brand Double Blade III cooler. It consists of four nickel-plated heatpipes (2x 6 mm, 2x 8 mm), an aluminum heatsink as well as three 80-mm fans. The latter are developed on double ball-bearings.

Pricing is …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 17 June 2012, 11:11
Last visit: 17 June 2012, 11:11