Enermax to Announce a New Mid-Tower Case Fulmo ST

Enermax Technology, an established Taiwanese developer of various PC hardware components, is about to announce its new roomy PC case within the boundaries of Fulmo series. Codenamed Fulmo ST, the case is designed in mid-tower form-factor and is distinguished by massy dimensions. Featuring 485x244x513 mm, the product’s weight approximates 8.2 kg. The novice will be available in two color variations: gray (ECA3270A-G-BL) and black (ECA3270A-B-BL).



Fulmo ST is ready to accommodate up to eight PCI expansion cards, three 5.25-inch drives and eight drives either of 3.5- or 2.5-inch standard. The case is compatible with ATX and micro-ATX motherboards, quite lengthy graphics cards (up to 412 mm if demounting the top HDD/SSD bay), as well as rather lengthy dual-heatsink for the water-cooling system (up to 280 mm). The latter might be replenished by ten fans of either 120 mm or 140 mm dimensional type.


Upon the whole, Enermax will deliver its Fulmo ST case with three …

Akasa Intros a Small-Sized AK-CC1101EP02 CPU Cooler

Following the release of a low-profile cooler, codenamed AK-CC7122EP01, Akasa is glad to introduce one more small-sized item. The AK-CC1101EP02 features 80x80x28.3 mm dimensions and is predestined to be employed as a part of a compact system within mini-ITX/micro-ATX chassis. The model is compatible with AMD FM1/FM2/754/939/AM2(+)/AM3(+) sockets only.



Akasa AK-CC1101EP02 involves an aluminum heatsink with cam-lever clip installation type, a thermal compound on the base, and a 80 mm fan. The latter is based on EBR bearing and equipped with PWM technology that adjusts the rotational speed from the minimal 600 RPM to the maximal 3000 RPM.


Its efficiency achieves 26.53 CFM, producing up to 27 dB noise. The estimated time of fail-proof operation equals to 40.000 hours. The fan is adjoined to the motherboard via a 4-pin connector and receives voltage power via 12VDC bus.


Just for comparison means, the predecessor — AK-CC7122EP01 – features 85.2x87.2x26 mm dimensions. …

Enermax Outs High-Flown Twister Pressure Fan

One of the major requirements for an efficient CPU cooler is a high static pressure. The higher this index is, the more productive the blades are. Quite the contrary, the main requirement for a system fan is a volume of produced airflow, since it affects the air circulation within the case. Taking into account those facts, Enermax decided to elaborate a fan that would unite both demands. That is how Twister Pressure fan came into the market.



Enermax Twister Pressure is a high-efficiency fan targeting to be implementing within CPU cooling solutions. It is based on Twister Bearing 2, which framework has been optimized for a reliable operation under unfavorable thermal conditions (up to 85 degrees) and under high dust content. The second version of Twister Bearing is supposed to run over 160.000 hours in fail-proof mode; this is 60% more than the initial version could perform.


To continue, this fan offers three operational modes: Performance, Silent and Ultra Silent. All of …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 26 August 2011, 14:30
Last visit: 26 August 2011, 14:30