The Highly Effective Galax GeForce GTX 1050 OC Graphics Accelerator

The Galax Company is ready to release the GeForce GTX 1050 OC graphics accelerator with a slight factory overclock.



This graphics card is based on the 14 nm Pascal GP107 graphics chip and features 640 streaming processors. The base and boosted core frequencies correspond to 1,366 and 1,468 MHz comparing to 1,354 and 1,455 MHz of reference units. There are 2 GB of GDDR5 memory with a 128-bit bus and with the frequency of 7,008 MHz. Being a Pascal-based device, this specialty is designed with FinFET technology and supports DirectX 12 for the fast and smooth gaming session.


The graphics accelerator is equipped with a one-fan cooling system (the diameter of the cooler is 90 mm). Displays can be connected via such ports, as DVI-D, HDMI and DisplayPort. The product takes two expansion slots in the chassis.


Galax GeForce GTX 1050 OC will be on sale since 23rd of December at the approximate price of $140.

Cooler Master to Release a New Budgetary Midi-Tower Chassis

New PC chassis from Cooler Master appear in the market with an enviable regularity. Each customer group, starting from entry-level customers and finishing with overclockers, can totally avail themselves with the up-dated facilities provided by the developer. This time, individuals with a quite modest budget will have an opportunity to enjoy all the privileges of contemporary technologies, since Cooler Master is going to release next month a new budgetary PC case of midi-tower form-factor. Codenamed CM Force 500, the case features 491.5x190.426 mm dimensions and is entirely painted black.



Chassis CM Force 500 supports motherboards of ATX and micro-ATX standard, and is ready to welcome all graphics adapters of up to 320 mm in length. Internal framework is estimated for the installation as of air cooling system, so of liquid coolers; hence, the maximal admissible height of the CPU air cooler approximates 164 mm, while dimensions of the heatsink attached to the liquid cooler should …

The Compulab IPC3 Mini-PC with Passive Cooling Goes for 693 USD

One of the latest products by Compulab is an IPC3 mini-PC, intended for industrial and commercial use. The lowest price of the basic model is 693 USD.



Outside dimensions of the framework are 160 х 190 х 40 mm. Due to its exterior construction the case provides overall passive cooling.


There’s a possibility to install 32 GB of RAM, a 2.5” storage drive, an M.2 2260 SSD and a couple of devices with an mSATA connector. The novelty features wireless interface adapters along with two USB 2.0, four USB 3.0, two Gigabit Ethernet, a DisplayPort 1.2, an HDMI 1.4a and an S/PDIF ports. However, special modules will be able to extend this set of connectors.


The Compulab IPC3 Mini-PC operates an Intel Kaby Lake CPU and is protected by the five-year manufacturer warranty.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.38
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 21 November 2012, 04:56
Last visit: 09 April 2013, 17:04