Asus Boasts One More Graphics Adapter with a Two-Slot Cooler

Asus has replenished its graphics card series based on Kepler architecture with a brand variation of one-chip GeForce GTX 680 adapter. Brand Asus GeForce GTX 680 card has been developed on an original in design circuit board and is notable by the doubled to 4GB GDDR5 memory capacity. Nevertheless, the most outstanding characteristic of a new product is the implementation of a two-slot cooling system, codenamed DirectCU II. Earlier Asus equipped its GeForce GTX 680 adapters with three-slot coolers.



The company decided to concentrate mainly on the introduction of an uncommon cooling system, leaving all frequency showings identical to the recommended by Nvidia index. Thus, graphics core operates at 1006 MHz frequency, while memory module works at 6008 MHz. Memory chips are soldered on both sides of the circuit board. The reverse side of PCB is covered by an aluminum plate that is in direct contact with GDDR5 chips.


Some IT professionals dare assuming that the rejection of …

Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.



New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.


The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …

Palit to Release a Pair of GTX 1060 Video Cards

Palit is enlarging its lineup of GeForce GTX 1060 adapters with a pair of new models. The GTX 1060 Dual 3GB and the GTX 1060 StormX 3G are developed on Nvidia GP106-300 GPUs (16 FinFet), featuring 1152 CUDA cores, 72 TMUs & 48 ROPs. It runs at 1506/1708 MHz frequency (standard/dynamic). Both models are accompanied by 3 GB of GDDR5 memory (192-bit bus) that operates at 2000/8000 MHz frequency (standard/efficient).



The key differentiation between the models lies in the cooling system. Palit GeForce GTX 1060 StormX 3G is equipped with a single fan, replenished with a main heatsink and an additional one, housed on the power circuit. In its turn, Palit Geforce GTX 1060 Dual 3GB is fitted with a voluminous rectangular heat spreader, three copper heat pipes as well as two fans. Thus, it’s an ideal choice for overclockers.


Both video cards employ a single 6-pin connector to draw power. They feature a high-quality hardware base which counts solid-state capacitors, DrMOS chips, …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 18 November 2012, 18:45
Last visit: 18 November 2012, 20:22