Evga Launches One More Overclocked Graphics Card

Evga, a leading American supplier of 3D cards, is going to launch one more graphics card with factory overclocked speeds. A new model is based on Nvidia FeForce GTX 670 adapter and codenamed as Evga GeForce GTX 670 FTW LE. Its design resembles the one implemented in GeForce GTX 670 FTW card, but the main distinction between them is seen in frequency showings. The newbie demonstrates a bit lower frequency index than its predecessor.

Evga GeForce GTX 670 FTW LE is housed on a PCB designed for PCI-e 3.0 x16 bus. This card takes GK104 graphics core with 1344 CUDA cores as the basis; it is developed on Kepler architecture under 28 nm standards. Its inventory also embraces 2GB of GDDR5 memory (256-bit interface). Cooling system is introduced by a 2-slot cooler of active type with a single turbine-like fan. Power subsystem consists of two connection 6-pin sockets and requires a quite efficient PSU (not less than 500W power).

Frequency template looks the following way: GPU runs at …

SSD Kingston HyperX 3K Review

The opulence of solid-state drives in PC market promotes for a sufficient supply to all potential customers. Irrespective of the rich choice, some products prove to be inefficient in coping with certain tasks. Durability and fool-proof work are one of the major SSD identifying features that worry the targeted users. It should be underlined that with the development of ever newer technologies ascribed to the design of micro chips, SSDs increased their work immensely. Kingston HyperX 3K is a product with outstanding parameters and prolonged life. It is estimated for three thousand cycles of cell rewriting and predestined for mid-market sector.


SSD Kingston HyperX 3K goes in several capacity variants: 90GB, 120GB, 240GB, and 480GB. All the drives are developed in 2.5 inch form-factor and employ SATA 6 Gb/sec interface. Other specifications of the model line include:

— memory chips: memory type – MLC (synchronous), interface – ONFi2, technological …

NZXT Rolls Out a New Chassis Phantom 630 Windowed Edition

NZXT has proudly announced the release of its newest PC chassis, codenamed Phantom 630 Windowed Edition. Being a modified version of Phantom 630 model, the ‘greenhorn’ is developed in ultra-tower form-factor, featuring a side-panel window. The case supports quite large motherboards (ATX, EATX, XL-ATX, and micro-ATX) and offers nine expansion slots.

Despite visual discrepancy with the original model, Windowed Edition preserved some of its basic features. Therefore, it allows for the integration of four 5.25-inch drives and eight 3.5/2.5-inch ones. The latter are installed into modular bays which can be removed if necessary. The chassis is ready to accept CPU coolers of 200 mm in height and long graphics adapters (up to 325 mm in length). In case the user decides to remove the internal drive bays, it will become possible to employ much longer adapters, up to 507 mm!

The other peculiarity of Phantom 630 Windowed Edition is the feasibility to incorporate two 2.5-inch …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 04 June 2012, 16:58
Last visit: 04 June 2012, 16:58