Three New Nettop Models of NanoPC Series from Foxconn

Foxconn Electronics introduces three new nettops which replenish NanoPC 7000 series. All three, NanoPC AT-7300, NanoPC AT-7500 and NanoPC AT-7700, are claimed to be practically noiseless due to the improved integration and layout base. As scheduled by Foxconn, all the models will become available in March 2013 and will be priced at $390, $480, $600 correspondingly.



These nettops are based on Intel Ivy Bridge platform but are equipped with a bit different CPUs. Thus, NanoPC AT-7300 model accommodates Intel Core i3-3217U processor that operates at 1.8GHz clock frequency; NanoPC AT-7500 model houses Intel Core i5-3317U processor with 1.7GHz clock frequency; NanoPC AT-7700 takes Intel Core i7-3517U processor with 1.9Ghz frequency as the basis.


The integrated motherboard complies with a mobile chipset Intel HM76 Express and features Intel HD Graphics 4000 graphics core. Internal layout of all nettops presupposes the installation of 16GB DDR3 RAM and of additional HDD/SSD drive …

Galaxy Microsystems Releases Two New Graphics Cards, Based on NVIDIA Pascal – KFA2 GeForce GTX 1080 EXOC Sniper White and GTX 1070 EXOC Sniper White

The two novelties by Galaxy Microsystems – GeForce GTX 1080 EXOC Sniper White and GTX 1070 EXOC Sniper White – are highlighted not only due to their white colouring, but also due to their non-reference cooler and PC-board design, to the factory overclocking and to the LED-backlighting of fans and the aluminium back plate.



These specialties are equipped with a two-slot cooler possessing several copper nickel-plated heat pipes. There are two memory chip life wires and an 8-pin and a 6-pin PCI-E Power connectors.

The main cooling system contains an aluminium heat dissipator for VRM transistors and a pair of 100 mm fans.


Based on the GP104-400 chip, the top-of-the-line model operates 2,560 streaming processors, 160 TMUs, 64 rendering blocks and 256-bit line, which works together with the 8 GB GDDR5X RAM. The KFA2 GeForce GTX 1080 EXOC Sniper White frequency formula looks like 1,657–1,797/1,250(10,000) MHz for the core and memory respectively.


The graphics cards …

A Triplet of Waterblocks for Titan Z Graphics Solutions from EK Water Blocks

EK Water Blocks, a well-known Slovenian manufacturer of enthusiast-level liquid coolers for GPUs, has just introduced a triplet of waterblocks for the newly arrived Nvidia GeForce GTX Titan Z adapters. The EK-FC Titan Z – Nickel, EK-FC Titan Z – Nickel (Original CSQ) and EK-FC Titan Z – Acetal + Nickel models are sure to provide the maximal cooling at the highest frequencies both for dual- GPUs and memory chips. All the blocks come with a transparent acrylic cover and a lid from POM ACETAL plastic.



EK-FC Titan Z waterblocks are attributed to full-cover solutions. This implies that they efficiently remove heat not only from graphics cores, but also from GDDR5 memory chips, as well as from voltage regulators of VRM subsystem. Areas in direct contact with the GPUs are equipped with micro-channels of 0.7 mm width. The blocks maintain resistance to the coolant stream; hence, they might be employed along with low-power pumps.


The waterblocks features copper nickel-plated …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.41
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 16 January 2012, 01:56
Last visit: 16 January 2012, 02:06