Xilence Company has presented a kilowatt power supply unit of XQ series

Taiwanese company Xilence released two PSU of unusual design — XQ Series of 750 and 850 W capacities. In contrast to usual offers on the market, these PSU are equipped with a pair of 60-mm fans. It has separate adjustment of speed and can operate in a completely passive mode at a load of up to 20-30%.

Recently, Xilence added to the above-mentioned series a power supply with nominal 1000W. New model in the pre-sale testing was certified with 80 Plus Platinum, which indicates the level of efficiency from 90% to 94% in the system of 230 V. Like its predecessors, the unit uses a modular principle of cabling, active power factor correction mechanism and complies with ATX12V v2.3 and EPS12V v2.92 standards. The list of available power cables (connectors) is the following: 4x PCI-E 6-pin, 4x PCI-E (6 + 2)-pin, 7x Molex 4-pin, FDD, 12x SATA, EPS12V (4 +4)-pin, EPS12V 8-pin and ATX (20 +4)-pin.

Five-year warranty on the Xilence XQ 1000W provides the possibility of replacement the …

Buffalo Announces HD-PCFU3-C Wearables

Buffalo Technology is about to release its newest line of wearable hard drives. Codenamed HD-PCFU3-C, the products will be available in three capacity versions: 500 GB, 1 TB, and 2 TB. All of them allow as pure black so pure white exterior design. The models will be backed by 1 year limited warranty.

The Buffalo HD-PCFU3-C external HDs are housed in solid aluminum cases and equipped with a high-speed USB 3.0 interface. The latter might be used both for data transfer as well as charge-in purposes; put it otherwise, the user will be saved from the necessity to buy an additional AC adaptor.

Pricewise, the cheapest solutions are 500 GB HD-PCF500U3-BC and HD-PCF500U3-WC with the price tag of $90. The HD-PCF1.0U3-BWC and HD-PCF1.0U3-BBC of 1 TB capacity will cost about $110, whereas their senior companions, the PCF2.0U3-GBC and HD-PCF2.0U3-GWC of 2 TB capacity, will go as high as $165. Shipping is to start in early January 2015.

Inno3D launches video cards iChill GTX 680/670 LCS

Hong Kong manufacturer of graphics cards Inno3D announced the delivery of two fresh products based on the base of the graphics core Nvidia GK104 and the original cooling system Arctic Accelero Hybrid, — iChill GTX 680 iChill GTX and LCS 670 LCS.

It should be noted that the models Inno3D iChiLL Black Series GeForce GTX 680 Accelero Hybrid and Inno3D iChiLL Black Series GeForce GTX 670 Accelero Hybrid withdrawal of excess heat is engaged in a hybrid cooler ARCTIC Accelero Hybrid. New models use NWO Danish contractor Asetek to cool the GPU. It includes a water block with copper base and a built-in pump, rubber tubes that extend to the radiator, and 120-mm fan with PWM speed control. Batteries and GDDR5 memory chips are covered with a flat radiator (PA plate) in black, which is blown by 80-mm fan attached to three slot casing.

Inno3D and Arctic promise significant improvement in temperature of CPU GK104, which made it possible to raise the frequency from 1006 (1058) / 6008 …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 30 November 2011, 21:40
Last visit: 30 November 2011, 21:58