Motherboard Biostar Hi-Fi Z87X 3D Review

When all the turmoil connected with the launch of new Intel Haswell processors becalmed, potential customers could finally get their own opinion about CPU facilities and decide whether an upgrade is a sensible move. A flagship motherboard from Biostar, entitled Hi-Fi Z87X 3D, proves that it worth the effort. Biostar was one of the first manufacturers in the market to pay much attention to audio subsystem. Hence, all the best audio elaborations have been aptly implemented in its flagship board.

General Specifications

Biostar Hi-Fi Z87X 3D positions itself as the motherboard for overclocking, featuring:

— chipset: Intel Z87;

— form-factor: ATX, dimensions – 305x244 mm;

— socket and supported processors: Socket 1150, Intel Haswell Pentium, Core i3/i5/i7;

— built-in graphics core: Intel HD Graphics 4600;

— memory: type – DDR3, capacity – up to 32 GB, clock frequencies – 1066 MHz – 2800 (OC) MHz;

— expansion slots: three PCI-e 2.0 x1, two …

PowerColor Radeon R9 295X2: High-End Adapter with Two GPUs

PowerColor has recently launched the most powerful in AMD’s Radeon series graphics card, entitled Radeon R9 295X2. The key peculiarity of the model is the availability of two GPUs, which are accompanied by a hybrid cooling system. Such remarkable specifications make the card an ideal solution for advanced gamers and overclocking enthusiasts.

PowerColor Radeon R9 295X2 employs PCI-e 3.0 x16 interface and incorporates a pair of AMD Hawaii XT GPUs (28 nm, GCN 2.0). Each processor features 2816 CUDA cores, 64 ROPs, and 176 TMUs. They operate at the maximal 1018 MHz clock frequency. Each GPU ‘cooperates’ with 4 GB GDDR5 memory (8 GB in total) with 512-bit rails. Its nominal clock frequency makes up 1250 MHz, whereas efficient frequency might reach up 5000 MHz.

This remarkable graphics card is furnished with a hybrid cooler. Both GPUs are taken care by a liquid-cooling solution of enclosed type, power circuits are taken care by air cooling. The latter consists of a fan …

Asus to Start Shipping Radeon R9 290 DirectCU II OC Graphics Card

Next week Asus is going to start shipping its newest graphics card from Radeon R9 series. Codenamed Radeon R9 290 DirectCU II OC, it is based on an original PCB with black-and-red design and the incorporation of an exclusive DirectCU II cooling system. Plus, the availability of ‘OC’ in the codename implies the availability of factory overclocking.

Asus Radeon R9 290 DirectCU II OC takes GCN Hawaii core with 2816 stream processors as the basis. It operates at an overclocked 1000 MHz frequency. The model is equipped with 4 GB of GDDR5 memory (512-bit bus) that runs at an effective 5400 MHz frequency. Just for a comparison, etalon adapter from AMD runs at 947 MHz/ 5000 MHz for GPU/memory correspondingly.

DirectCU II cooler consists of a heatsink, four copper nickel-plated heatpipes (two of them feature 10 mm dimensions), and two high-performance fans: one ordinary and one CoolTech. The card receives power via 6+8-pin connectors and might require not less than 600 W PSU.
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 26 May 2012, 20:03
Last visit: 26 May 2012, 20:03