Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.

New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.

The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …

Cooltek Rolls Out Thermolab CPU Coolers

Enlisting up support of a well-known German manufacturer PC Cooling GmbH (Cooltek brand), Thermolab brought on the European market a pair of small-sized CPU coolers. Codenamed LP53 and ITX30, the products are differentiated by the depth of the copper plates and the dimensions of the pre-installed fan. Both new-comers are predestined for mini-ITX and micro-ATX platforms with Intel LGA1156/1155/1150 socket and 100 W TDP processors.

The Thermolab LP53 features 100x94x53 mm dimensions and weighs 410 g (including fan). It consists of a copper base, two 6 mm heatpipes, and 7-blade PWM fan of 92 mm dimensional type. The latter is able to rotate within the speed range of 1000 RPM to 2100 RPM, producing up to 27 dB noise. The cooler’s price does not transcend 37 EUR.

In its turn, the Thermolab ITX30 features 100x94x30 mm dimensions and weighs 300 g. It accommodates a copper base, a heatsink, two 6 mm heatpipes, and a single 80 mm PWM fan. It supports a wider speed range – from …

The Launch of Motherboard Big Bang-ZPower from MSI is Round the Corner

On the threshold of international exhibition Computex ‘12, MSI has decided to boil up the interest of the potential customer audience to their new motherboard Big Bang-ZPower. So far, the company has highlighted only a few teasers, giving a superficial concept about their new product. There are not so many details revealed, but it’s definitely known that the motherboard will be based on Intel Z77 Express chips and support processors of Ivy Bridge and Sandy Bridge series.

The new Big Bang-ZPower is called to satisfy the needs of inveterate overclockers who appreciate might, functionality and framework. This model is intended to work with Intel Core i7/i5/i3 processors of the second or third generation in the implementation of Socket LGA1155. As seen from the teasers, the motherboard is equipped with the passive cooling system which employs heating tubes technology; in addition, this model will involve the enhanced power subsystem and UEFI with the diversified settings.

… …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 07 June 2012, 19:41