The Compulab IPC3 Mini-PC with Passive Cooling Goes for 693 USD

One of the latest products by Compulab is an IPC3 mini-PC, intended for industrial and commercial use. The lowest price of the basic model is 693 USD.



Outside dimensions of the framework are 160 х 190 х 40 mm. Due to its exterior construction the case provides overall passive cooling.


There’s a possibility to install 32 GB of RAM, a 2.5” storage drive, an M.2 2260 SSD and a couple of devices with an mSATA connector. The novelty features wireless interface adapters along with two USB 2.0, four USB 3.0, two Gigabit Ethernet, a DisplayPort 1.2, an HDMI 1.4a and an S/PDIF ports. However, special modules will be able to extend this set of connectors.


The Compulab IPC3 Mini-PC operates an Intel Kaby Lake CPU and is protected by the five-year manufacturer warranty.

Cooler Master Showcases G-Series PSUs



Along with the launch of new PC chassis, Cooler Master is ready to release new G-series power supply units. The series is introduced by three models – G500, G600 and G700 – with 500W, 600W and 700W power, respectively. All of them correspond to ATX12V v2.3 standard, support Active PFC option and a range of protection tools (from short circuit, overvoltage, current overload, power overload). Moreover, these units employ a dual EMI-filter and take benefit from a single 120 mm fan with automatic speed control functions.


Cooler Master G-series PSUs have been felicitated with 80Plus Bronze certificate, due to their high efficiency (approximately 85%) and an estimated mean time between failures of 100.000 hours. The two junior models, G500 and G600, are able to operate at 456W and 576W load, correspondingly, on +12V rail. They are quipped with six SATA Power sockets and a pair of PCI Express Power 6+2-pin sockets. G500 unit will come to the market at the price of €60, while …

Announcement of video card Gigabyte Radeon HD 7970 Super Overclock

The efforts of Gigabyte engineers culminated in the release of the Radeon HD 7970 Super Overclock, also known as GV-R797SO-3GD. This is a monstrous construction with height of 64 mm (3.5 expansion slots) and a cooling system WindForce 5X. As well as preparing to be released GeForce GTX 680 SOC, the new adapter uses a five high-speed (> 4000 rev / min) fan size of 40 mm, copper evaporation chamber, and five copper heat pipes.



WindForce 5X – is one of the most expensive VGA-coolers, except for models with water blocks and liquid cooling system. It will allow to overclock Gigabyte GV-R797SO-3GD up to frequencies of 1155/7620 MHz. However, neither the temperature nor the noise performance of video card can be considered satisfactory: 85 degrees under load and 91 ° C for overclocking with increased voltage, and 8000 rpm in a heavy-duty (1185 MHz, 1.375 V) explains the situation.


Printed circuit board Radeon HD 7970 SOC is reinforced with five polymer capacitors NEC / …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 23 November 2012, 22:19
Last visit: 18 February 2013, 20:19