The Release of Two 3D Graphics Cards from Sparkle Computer

Sparkle Computer, a Taiwanese supplier of graphics solutions and consumer electronics, has released two 3D graphics cards simultaneously. The two models have been codenamed Calibre X680 Captain and Calibre X670 Captain. Both cards are based on Nvidia GK104 GPUs developed under 28 nm standards. The chief peculiarity of the products is the integration of extraordinary cooler CoolPro; the uncommonness is seen in the localization of three fans that found their places under the radiator. This radiator is connected with the base, which is in direct touch with GPU, by means of six heat pipes.

Calibre X680 Captain and Calibre X670 Captain are equipped with DisplayPort, DVI, DVI-D, and HDMI video outputs. Graphics cards employ PCI Express 3.0 interface and support DirextX 11 interface, as well as, such Nvidia technologies as CUDA, PhysX, 3D Vision, and 3D Vision Surround. They are also notable for the availability of eight-phase voltage regulators and the enhanced depth of ground on the …

Greeting New HIS R7 260 iCooler 1GB GDDR5 Graphics Card

The lineup of graphics cards designed by HIS has been replenished with a new Radeon R7 260 model. Entitled HIS R7 260 iCooler 1GB GDDR5, the new-comer employs a typical PCI Express 3.0 x16 interface and comes with etalon clock frequencies. The R7 260 GPU (GCN, 28 nm) with 768 CUDA cores runs at 1000 MHz. It is accompanied by 1 GB of GDDR5 memory (128-bit bus) that operates at 1500 MHz/ 6000 MHz typical/effective frequency.

This adapter receives power through one 6-contact connector. Connectivity with PC monitors is realized due to three video ports: DisplayPort, HDMI and DVI-I. GPU and memory modules are cooled down by the forces of iCooler. It is not differentiated by an offbeat design; it consists of an aluminum heatsink and one low-profile fan.

Still, it offers acoustic convenience while fulfilling standard tasks: the maximal noise level does not exceed the limit of 28 dB. A supplementary aluminum heatspreader can be found in power supply section.

The HIS R7 260 …

WD Prepares Voluminous Re+ HDDs for Data Centers

Western Digital announces a new high-capacity 3.5-inch HDD for data centers. The WD Re+ will be available in versions of up to 6 TB. All of them are designed with power-saving ideas in mind; hence, their maximal power consumption index does not go above 6 W. The new-comer employs five-platter architecture and SATA 6 Gb/sec interface that guarantees the maximal efficiency level. Moreover, its MTBF index approximates 1.2 million hours on average workload index of 550 TB per year.

The WD Re+ is distinguished by the following advantages:

— the incorporation of dual actuator positioning system that improves the drive’s working efficiency;

— the implementation of RAFF technology that monitors HDD parameters in real time and compensates for the linear and angular vibration;

— the employment of StableTrac technology that reduces vibrations and stabilizes drive platters;

— the usage of TLER technology that prevents latencies or an abrupt destruction of RAID … …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 12 December 2011, 23:58
Last visit: 26 February 2012, 21:32