Computer Case be quiet! Silent Base 600 Overview (Part II)

Internal structure

The motherboard compartment is located above the power supply unit. In this regard, everything is quite standard for a Mid Tower class. A large cutout is made in a tray behind a CPU socket, to allow installation of a CPU cooling system directly into the case; a backplate mount (thrust-pad located on the back side of the motherboard) is used for this purpose.


The four large slots in a tray, equipped with the silicone membrane, are designed for proper cable management which looks very promising here. Plugs of expansion slots are attached by thumbscrews. The front part holds a hard disks’ basket for three drives.


At the back side a slot in a tray can be clearly seen to access cable management system slot. Also, the rear side contains two tool kits for installation of solid-state drives and size 2.5" hard disks.


The side cover is made of 0.7 mm steel, and from the inside has a thick vibration and noise absorbing coating. The recess in the …

Meet Strike-X Air and Vx Advance Series from Aerocool

Devotees of a futuristic design and uncommon framework cannot but revel in the launch of new chassis Strike-X Air from Aerocool developers. The long-awaited product is already in the market, as well as new Vx Advance series. Chassis Strike-X Air is distinguished by the ultra-original design and open-end framework type. According to the words of Aerocool representatives, the major emphasis has been made on the handiness of usage so that each person could have a direct access to any component of the chassis.



The chassis of Strike-X Air is made of steel and supports motherboards of Micro ATX, E-ATX and ATX dimension type, and graphics cards of 330 mm. length. Expansion cards and interface panels are installed due to the ten slots in the rear part of the device. The chassis is equipped with three external modules of 5.25 and 3.5 inches type. The clipboard is intended for a single USB 3.0 socket, three USB 2.0 sockets, and a couple of 3.5 mm. sockets for headsets with a microphone. … …

Greeting New PC Chassis ME880 from Delux

Delux Technology, a well-established manufacturer of PC hardware and peripherals, starts selling its new PC chassis, intended for budget-oriented gamers. Entitled Delux ME880, the model corresponds to ATX form-factor and features 410x192x435 mm dimensions. It supports all motherboards of ATX and micro-ATX standard, as well as a wide range of graphics solutions, due to the availability of seven PCI-slots in the rear section of the case. In order to meet some customers’ design requirements, this chassis will be available in three color variations: white, black and red.



ME880 is equipped with four external bays for the mounting of 5.25-inch drives. These bays, along with the bottom and side panels, are covered by a grid-like lid that ensures optimal ventilation and cooling down of all critical components. The internal layout presupposes PSU to be installed in the bottom part of the chassis; this positively affects cable management process, providing for a hassle-free access …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Gender: Female
Date of birth: 7 July 1989
Registered at: 27 September 2012, 00:44
Last visit: 28 September 2012, 03:51