Crucial Showcases Voluminous MX300 Solid-State Drives

Crucial is about to launch a new series of voluminous SSDs, entitled MX300. The lineup consists of 2.5-inch models with thin cases (7 mm only), targeting as desktop so mobile platforms. Additionally, the delivery set offers a dedicated 2.5-inch frame for the installation into a 9.5-inch bay. The capacity of drives makes up 275 GB, 525 GB, 750 GB, 1 TB, and 2 TB.

SSDs Crucial MX300 is developed on 32-layer Micron 3D NAND TLC chips (48 GB) as well as Marvell 88SS1074 controller. Data transfer process is realized via SATA III (6 Gb/sec) interface. The maximal sequential Read/Write speed equals to 530 MB/sec/510 MB/sec. In its turn, the maximal random data transfer index approximates 83.000/92.000 IOPS (Read/Write).

The greenhorns are thought to support the following technologies: AES, ECC, T.R.I.M., Data Path Protection, S.M.A.R.T., Active Garbage Collection, Power Loss Prevention, and Extreme Energy Efficiency. Besides, Dynamic Write Acceleration identifies and writes the …

NAS TS-219P II from QNAP Review

The choice of NAS for home use is frequently accompanied by the dilemma: the necessity to acquire a high-end device with multifunctional facilities at reasonable price. As usual, quality and good performance cost pretty penny, especially when it comes about innovative technologies; however, there are some NAS designers which provide their products at moderate cost but do not save on quality. Thus, QNAP company has released its new NAS solution TS-219P II designated as for home so for small business use. This model isn’t notable for outstanding design or ergonomics but offers efficient solution of any dedicated home assignments due to wide functional capabilities and good performance.


1. External design. QNAP TS-219P II goes in standard design with typical casing peculiarities. All internal components are fixed on a solid metallic framework, while the external casing is made of dull plastic. The faceplate is equipped with a plastic wafer which contains five …

Western Digital Enters the Market with My Cloud EX2 Ultra NAS

WD came out with a new enterprise-class storage, entitled My Cloud EX2 Ultra. The model is intended for the installation of two HDDs with the maximal capacity of 12 TB. According to the manufacturer, this NAS will be a perfect choice for professionals who require automatic data synchronization, file sharing, data backup, etc.

WD My Cloud EX2 Ultra is based on 1.3-GHz CPU accompanied by 1 GB DDR3. The pair ensures the realization of fast data transferring as well as smooth video streaming. The compatible drives support RAID 0/1, JBOD & Spanning operational modes. Backup process might be realized in several ways: data backup to the other NAS, to the external storage via USB 3.0 port or to the cloud storage via LAN/WAN network.

The model is shipped with pre-installed HDDs (WD Red with support for NASware 3.0 technology), configured to operate in RAID 1. NASware 3.0 is called to improve solidity, minimize data loss prospects in case of power off or voltage surge. If required, …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 04 May 2011, 04:14
Last visit: 04 May 2011, 04:14