Akasa Intros a Small-Sized AK-CC1101EP02 CPU Cooler

Following the release of a low-profile cooler, codenamed AK-CC7122EP01, Akasa is glad to introduce one more small-sized item. The AK-CC1101EP02 features 80x80x28.3 mm dimensions and is predestined to be employed as a part of a compact system within mini-ITX/micro-ATX chassis. The model is compatible with AMD FM1/FM2/754/939/AM2(+)/AM3(+) sockets only.

Akasa AK-CC1101EP02 involves an aluminum heatsink with cam-lever clip installation type, a thermal compound on the base, and a 80 mm fan. The latter is based on EBR bearing and equipped with PWM technology that adjusts the rotational speed from the minimal 600 RPM to the maximal 3000 RPM.

Its efficiency achieves 26.53 CFM, producing up to 27 dB noise. The estimated time of fail-proof operation equals to 40.000 hours. The fan is adjoined to the motherboard via a 4-pin connector and receives voltage power via 12VDC bus.

Just for comparison means, the predecessor — AK-CC7122EP01 – features 85.2x87.2x26 mm dimensions. …

Router TP-Link Nano TL-WR702N Review

Wi-Fi technology has got wide prevalence in recent years, offering convenient and efficient Internet connection. Nevertheless, when it comes about traveling to the remote sites, Wi-Fi connection might be poor or absent at all. The release of router TP-Link Nano TL-WR702N was called to solve the problem of poor signal or connectivity while on move. It enables the creation of a separate Internet access point or the amplification of the available signal.

Layout and Destination

TP-Link Nano TL-WR702N has been developed with good portability and simplicity of use in mind. It goes in blue, green and pink colors. The major peculiarity of this router is its dimensions: it's the most compact wireless model in the market which can be easily transported due to the hand-size properties. Irrespective of the size, the router proves to show outstanding efficiency in the accomplishment of all basic wireless applications.

Model Nano TL-WR702N is a multi-functional wireless network …

Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.

New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.

The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 15 June 2011, 18:34
Last visit: 16 August 2011, 19:52