Enermax Starts Selling Chassis Hoplite ST

Enermax Technology Corp. has voiced good news about the appearance of its new chassis Hoplite ST in the European market. The basic destination of Hoplite ST model is the creation of gaming PCs of the entry and middle level. The chassis is developed in midi-tower form factor and is compatible with motherboards of micro-ATX and ATX standards. Hoplite ST is delivered in two colors: models with black casings were codenamed ECA3261-B, while models with white casings – ECA3261-W.

The casing is made of SECC steel and has got rather convenient framework. The chassis contains four external 5.25 inch bays and six internal ones destined as for 3.5 inch drives, so for 2.5 inch drives. It is also equipped with seven expansion slots, and ready to accommodate graphics cards of up to 403 mm in length, as well as, CPU coolers of 167 mm in height.

The nominal delivery kit of Hoplite ST chassis involves two 120 mm fans. The frontal fan goes with LED lighting; the other fan is located at …

Sapphire Radeon RX 480 Nitro OC is Available for Preorder

Sapphire is about to launch the first modification of AMD’s graphics adapter – the Radeon RX 480. The new-comer, entitled Radeon RX 480 Nitro OC, is already available for preorder at the price tag of $322. The PCB, as well as the integrated cooling system, employs a modified design. The ‘OC’ postfix implies that the card has been overclocked to provide for a better performance.

Sapphire Radeon RX 480 Nitro OC comes equipped with AMD Polaris 10 GPU (14 nm, FinFet, GCN). It features 2304 stream processors, 32 ROPs & 144 TMUs. The presumptive GPU clock frequency might achieve 1350 MHz. At the same time, memory subsystem hasn’t been modified: 8 GB of GDDR5 are supposed to run at 2.0/8.0 GHz (base/dynamic) frequency.

The 2-slot cooling system employs a few heatpipes, a large aluminum heatsink, a stiffening plate at the reverse side, and a couple of 100-mm fans. The latter are able to operate in passive mode when GPU temperature is low. Moreover, the model boasts the …

LG to Release a Stylish PC Monitor 23ET63V

LG Electronics, a South Korean tycoon in consumer electronics market, is going to release a new stylish monitor, codenamed 23ET63V. This model features 23-inch display and Full HD resolution of 1920x1080 pixels. However, its basic flavor is an ultra-thin case (555x338x53 mm) and a touchscreen AH-IPS panel with the support of 10 multi-touch dabs. The latter also boasts a high gloss surface with 3H rigidity.

The other parameter that might be of interest to all potential users is absence of a traditional stand. Instead of it, there is a dedicated holdup that allows for tilt adjusting only (from 15 to 58 degrees). Such holdup positioning might be rather convenient to work with applications supporting a touchscreen data access. The display can be employed as a wall screen, thanks to the availability of 75x75 VESA bracket.

The rear panel of the display houses D-Sub, HDMI and USB 2.0 (for touchscreen input) ports for the connection of varied devices. Generally, 23ET63V consumes …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 10 November 2012, 09:37
Last visit: 10 November 2012, 09:49