Chassis Chieftec Libra LF-01B-OP Review

Chieftec is the company that tries to satisfy the needs of any customer, by supplying multifarious PC hardware. Its latest chassis series, codenamed Libra, is primarily aiming at gamers due to its splashy design and elaborated layout. Chassis Libra LF-01B-OP is a senior model in the series that is distinguished by a more distinct gaming directionality: ATX form-factor, bottom-part PSU localization, a line of fans, dock station for hard drives, and some other pleasing facilities.



Design


Chieftec Libra LF-01B-OP is notable by restrained design peculiarities with a bit rounded angles and straight lines. The casing is totally black from the outside and inside with the wee bit dull surfacing. The upper panel is made of plastic; its larger part is taken by a grid that serves a means of hot air blow-out. Closer to its front part, one can find a dock station for 3.5/2.5-inch drives and a recess for peripheral components. Interface panel is introduced by two USB 3.0 ports and the …

Meeting New Cooling System Brocken 2 from Alpenfoehn

Only a couple of weeks are left till the official release of a new cooling system Brocken 2 designed by Alpenfoehn. This is a long-awaited launch, since the fist version of the system, entitled Brocken, was honored to gladden the audience long time ago. Hereby, Brocken 2 has got a wee bit modified framework, if compared with the predecessor. Its dimensions together with a fan equal to 146x100x165 mm.



The base is shaped by means of five 6 mm copper heat pipes, tightly pressed together. Aluminum plates of the heatsink seem to be ‘cut’ in the center, unlike the one-piece construction of plates implemented in Brocken.


Active cooling power is ensured by a nine-blade fan of 140 mm standard size, known as WingBoost 2. The fan supports PWM technology that allows altering its rotational speed within the boundaries of 400-1100 RPM. Its activity stimulates the airflow index of 109 CFM, while the noise level barely achieves 19.6 dB (A). WingBoost 2 features small distance between …

A Triplet of Waterblocks for Titan Z Graphics Solutions from EK Water Blocks

EK Water Blocks, a well-known Slovenian manufacturer of enthusiast-level liquid coolers for GPUs, has just introduced a triplet of waterblocks for the newly arrived Nvidia GeForce GTX Titan Z adapters. The EK-FC Titan Z – Nickel, EK-FC Titan Z – Nickel (Original CSQ) and EK-FC Titan Z – Acetal + Nickel models are sure to provide the maximal cooling at the highest frequencies both for dual- GPUs and memory chips. All the blocks come with a transparent acrylic cover and a lid from POM ACETAL plastic.



EK-FC Titan Z waterblocks are attributed to full-cover solutions. This implies that they efficiently remove heat not only from graphics cores, but also from GDDR5 memory chips, as well as from voltage regulators of VRM subsystem. Areas in direct contact with the GPUs are equipped with micro-channels of 0.7 mm width. The blocks maintain resistance to the coolant stream; hence, they might be employed along with low-power pumps.


The waterblocks features copper nickel-plated …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 07 September 2011, 18:39
Last visit: 07 September 2011, 18:39