The Introduction of Transparent Chassis from Scythe

Scythe has recently amazed the community by the introduction of absolutely transparent chassis. ACB-Type3 model preserves the cutout of the standard Mid-Tower chassis solutions, but is made of transparent acrylic plates. One more peculiarity of this model is the parallel to the base localization of motherboard. Besides, ACB-Type3 is compatible with motherboards of various form-factor, including mini-ITX, micro-ATX, and ATX.

The motherboard is accommodated on a special tray. Right under this tray the customers are able to find a set of bays designated for the installation of PSU, three 3.5-inch drives, a couple of 2.5-inch drives, and three 5.25-inch drives. The chassis is compatible with CPU coolers of up to 190 mm in height.

At the same time, this model goes without any fans or side panels; this attributes the model to Open-Air segment. The product can content itself with practically noiseless passive system.

Scythe ACB-Type3 is equipped with sufficient number of …

HIS Teases New Radeon R9 280X IceQ Boost Clock Graphics Card

HIS is glad to introduce one more high-end solution: the Radeon R9 280X IceQ Boost Clock graphics card that is targeting high-performance PC systems. The model employs turbine-type cooling system with a branded IceQ cooler. It consists of a voluminous copper base (35x28 mm), an aluminum heatsink, four nickel-plated heat-pipes (2x 8 mm and 2x 6 mm), as well as a single 80 mm turbine fan. Such cooling is ideal for multi-GPU configurations in AMD CrossFireX mode, since the distance between adapters does not influence the efficiency of their fans.

The new-comer is based on AMD Radeon R9 280X GPU (28 nm, GCN) with 2048 stream processors. It runs at standard frequencies: 850 MHz – nominal and 1000 MHz – dynamic. Memory is introduced by 3 GB GDDR5 modules, which run at standard 1500 MHz frequencies and reach some 6000 MHz effective index.

To continue, HIS Radeon R9 280X IceQ Boost Clock features four connectivity interfaces: a pair of mini-DisplayPort ports, one DVI-I and …

Deepcool to Release an Updated Lucifer K2 Efficient CPU Cooler

Deepcool has introduced a ‘companion’ to its well-known cooler entitled Lucifer V2. The all-new Lucifer K2 features 163x146.5x131 mm dimensions and weighs 1047 g. The new-comer supports AMD and Intel platforms, including LGA2011-v3, LGA2011, LGA1366, LGA115x, LGA775 (Intel) & Socket FM2, FM2+, FM1, AM2, AM2+, AM3, AM3+ (AMD) as well as various CPUs with TDP level of not more than 130 W.

Deepcool Lucifer K2 boasts a purely-polished copper base, six copper heatpipes and an aluminum heatsink (140x110x163 mm). The latter ensures a large heat dissipation area. Despite having stately proportions, the cooler does not block off the access towards DIMM slots.

The key differentiation between V2 and K2 models lies in the choice of a fan. The previous solution featured a 140-mm item, while the newer one – a 120-mm fan, based on a fluid-dynamic bearing. The fan supports PWM technology that provides for a wide rotational range — from 600 RPM to 1800 RPM, — generating up to …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 12 June 2011, 13:48
Last visit: 12 June 2011, 13:48