NZXT Rolls Out a New Chassis Phantom 630 Windowed Edition

NZXT has proudly announced the release of its newest PC chassis, codenamed Phantom 630 Windowed Edition. Being a modified version of Phantom 630 model, the ‘greenhorn’ is developed in ultra-tower form-factor, featuring a side-panel window. The case supports quite large motherboards (ATX, EATX, XL-ATX, and micro-ATX) and offers nine expansion slots.



Despite visual discrepancy with the original model, Windowed Edition preserved some of its basic features. Therefore, it allows for the integration of four 5.25-inch drives and eight 3.5/2.5-inch ones. The latter are installed into modular bays which can be removed if necessary. The chassis is ready to accept CPU coolers of 200 mm in height and long graphics adapters (up to 325 mm in length). In case the user decides to remove the internal drive bays, it will become possible to employ much longer adapters, up to 507 mm!


The other peculiarity of Phantom 630 Windowed Edition is the feasibility to incorporate two 2.5-inch …

Enermax Outs High-Flown Twister Pressure Fan

One of the major requirements for an efficient CPU cooler is a high static pressure. The higher this index is, the more productive the blades are. Quite the contrary, the main requirement for a system fan is a volume of produced airflow, since it affects the air circulation within the case. Taking into account those facts, Enermax decided to elaborate a fan that would unite both demands. That is how Twister Pressure fan came into the market.



Enermax Twister Pressure is a high-efficiency fan targeting to be implementing within CPU cooling solutions. It is based on Twister Bearing 2, which framework has been optimized for a reliable operation under unfavorable thermal conditions (up to 85 degrees) and under high dust content. The second version of Twister Bearing is supposed to run over 160.000 hours in fail-proof mode; this is 60% more than the initial version could perform.


To continue, this fan offers three operational modes: Performance, Silent and Ultra Silent. All of …

Buffalo Announces HD-PCFU3-C Wearables

Buffalo Technology is about to release its newest line of wearable hard drives. Codenamed HD-PCFU3-C, the products will be available in three capacity versions: 500 GB, 1 TB, and 2 TB. All of them allow as pure black so pure white exterior design. The models will be backed by 1 year limited warranty.



The Buffalo HD-PCFU3-C external HDs are housed in solid aluminum cases and equipped with a high-speed USB 3.0 interface. The latter might be used both for data transfer as well as charge-in purposes; put it otherwise, the user will be saved from the necessity to buy an additional AC adaptor.


Pricewise, the cheapest solutions are 500 GB HD-PCF500U3-BC and HD-PCF500U3-WC with the price tag of $90. The HD-PCF1.0U3-BWC and HD-PCF1.0U3-BBC of 1 TB capacity will cost about $110, whereas their senior companions, the PCF2.0U3-GBC and HD-PCF2.0U3-GWC of 2 TB capacity, will go as high as $165. Shipping is to start in early January 2015.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 17 September 2011, 01:27
Last visit: 17 September 2011, 01:27