Zalman Showcases a New GV Series of Power Supplies

Zalman is glad to introduce its fresh PSU series, entitled GV. Pursuant to the manufacturer, these power supplies are intended for the support of high-efficiency components. Taking into account the demands of contemporary PCs, Zalman equips the GV units with a single +12V bus that is able to endure high current capability. Upon the whole, the new series embraces three models: ZM500-GV (500W), ZM600-GV (600W), and ZM700-GV (700W).



All Zalman GV PSUs employ non-modular cable design and high-quality Dual-Forwarding Switching schemes. Those schemes allow for the decrease of losses on switching and for the lowering of operational temperatures. Thanks to this innovation, an overall efficiency of all units approximates 88%; such index is vindicated by 80Plus Bronze certificate.


Cooling of all internal hardware pieces is organized by efforts of a sole 120 mm fan. A comprehensive set of protection options saves all components from a variety of glitches (OVP, SCP, OPP, OCP, UVP), …

CPU Cooler SilverStone NT06-PRO Review

The tendency of assembling small-sized but efficient system units is becoming more apparent among all PC users. Nowadays the extensive occurrence of mini-tower chassis and mini-ITX motherboards requires the employment of corresponding pocket-size CPU coolers. Unfortunately, the latter are practically a rarity, however the demand for small but highly productive coolers is rising on daily basis. SilverStone is one of the few companies that elaborated such kind of products. Its latest NT06-PRO combines all advantages each full-sized model has and is ready to provide a truly efficient cooling.



Design and Framework


SilverStone NT06-PRO is a worthy representative of Nitrogen series. It features a bit unusual design with horizontal orientation. It consists of a voluminous heatsink, counting fifty-two aluminum plates, six C-shape heatpipes, and one fan, mounted underneath the heatsink. Such framework ensures a stable cooling of motherboard nodes and CPU environment. All aluminum …

Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.



New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.


The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 29 June 2012, 02:57
Last visit: 29 June 2012, 02:57