New Eisblock XPX Water Units by AlphaCool

Transfer efficiency of the thermal energy flux from the CPU to the cooling liquid in the circuit depends on the water unit. The AlphaCool Company, being famous for its liquid-cooling system components, has presented a new water units series, called Eisblock XPX. They’ll take the place of the previous model, NexXxoS XP3. The series of Eisblock XPX water blocks will be released on the market featuring various colour schemes, including the mountings colour. The manufacturer has taken into account the latest trends.



In new models the heat-exchange zone microchannel structure is refined: the fin spacing is reduced to 0.2 mm, and the fins number has grown up to 81. Thus, the heat-exchange area has become larger. The brand Ramp technology is applied to the heat-exchanger, which guarantees the absence of the coolant flow vorticity and its steady passing through the microchannels zone. At the same time the hydraulic circuit has been optimized to diminish flow resistance. Eisblock XPX …

Scythe to Introduce Monochrome Pro and Monochrome Value CPU Coolers



Scythe, an outstanding developer of prime-quality hardware solutions, announces its newest elaborations: the Monochrome Pro and Monochrome Value CPU coolers. Both products are differentiated by truly small-sized dimensions and can be incorporated into the most compact PC cases. The couple supports the latest Intel’s processors, which TDP level does not go beyond 95 W. So far, there is no information about the release date and pricing, however, Scythe promises to unveil the data in the short run.


In terms of framework, CPU cooler Scythe Monochrome Pro consists of an aluminum heatsink and a single fan. It features 112x112x62 mm dimensions and is compatible with Intel LGA 1150/1155/1156 platforms. Running at 800-2800 RPM, it is able to produce up to 52.98 CFM airflow (the minimal airflow index equals to 14.83 CFM). When running at low pace, the noise level stays at the minimal level of 10.2 dB; still, even when the rotational speed achieves its maximum, the noise does not …

The Compulab IPC3 Mini-PC with Passive Cooling Goes for 693 USD

One of the latest products by Compulab is an IPC3 mini-PC, intended for industrial and commercial use. The lowest price of the basic model is 693 USD.



Outside dimensions of the framework are 160 х 190 х 40 mm. Due to its exterior construction the case provides overall passive cooling.


There’s a possibility to install 32 GB of RAM, a 2.5” storage drive, an M.2 2260 SSD and a couple of devices with an mSATA connector. The novelty features wireless interface adapters along with two USB 2.0, four USB 3.0, two Gigabit Ethernet, a DisplayPort 1.2, an HDMI 1.4a and an S/PDIF ports. However, special modules will be able to extend this set of connectors.


The Compulab IPC3 Mini-PC operates an Intel Kaby Lake CPU and is protected by the five-year manufacturer warranty.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.38
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 27 November 2011, 15:45
Last visit: 27 November 2011, 15:45