Evga Launches One More Overclocked Graphics Card

Evga, a leading American supplier of 3D cards, is going to launch one more graphics card with factory overclocked speeds. A new model is based on Nvidia FeForce GTX 670 adapter and codenamed as Evga GeForce GTX 670 FTW LE. Its design resembles the one implemented in GeForce GTX 670 FTW card, but the main distinction between them is seen in frequency showings. The newbie demonstrates a bit lower frequency index than its predecessor.



Evga GeForce GTX 670 FTW LE is housed on a PCB designed for PCI-e 3.0 x16 bus. This card takes GK104 graphics core with 1344 CUDA cores as the basis; it is developed on Kepler architecture under 28 nm standards. Its inventory also embraces 2GB of GDDR5 memory (256-bit interface). Cooling system is introduced by a 2-slot cooler of active type with a single turbine-like fan. Power subsystem consists of two connection 6-pin sockets and requires a quite efficient PSU (not less than 500W power).


Frequency template looks the following way: GPU runs at …

Biostar Announces Budget-Oriented H110MD PRO Mainboard

Biostar has replenished its PRO series of motherboards with a budget-friendly model – H110MD PRO. The greenhorn is based on Intel H110 chipset compatible with Intel Skylake Socket LGA 1151 CPUs. As far as this micro-ATX board is an entry-level solution, it offers just basic facilities, including 5-phase VRM, a pair of DIMM slots for DDR3L-1600 MHz modules (maximal capacity – 16 GB).



Biostar H110MD PRO accommodates four SATA III (6 Gb/sec) ports for storage devices, one PCI Express 3.0 x16 slot (for graphics adapter) and a pair of PCI Express 2.0 x1 slots for expansion cards. Network possibilities are ensured by means of gigabit Realtek RTL8111G controller.


The I/O panel boasts the availability of two PS/2 ports, two video ports (D-SUB and DVI-D), one RJ-45 port, three audio sockets, and four USB ports (2x USB 2.0, 2x USB 3.0). Additionally, the motherboard supports a range of advanced features, such as Biostar Flash, BIO-Flasher, BIO-Relife, Watch Dog, e-HotLine, BIOS …

EK Water Blocks to Pass Out EK-CoolStream WE Heatsinks

EK Water Blocks, a renowned manufacturer of enthusiast-level waterblocks, is about to vend its newest series of heatsinks. Codenamed EK-CoolStream WE, the new-comers feature Circle SQuare (CSQ) design that shows compatibility with practically all water/liquid-cooling systems. They employ high-quality copper pipes and fins, as well as brass alloy enclosures which provide for an adequate cooling of entrusted components.



EK-CoolStream WE heatsinks are ready to welcome additional fans of 180x180x25 mm dimensions. Most notably, the company recommends using EK-FAN 180 PWM fan based on a fluid-dynamic bearing, estimated for 30.000 hours of foolproof operation. This model operates at 500-900 RPM, ensuring sufficient airflow thanks to the well-trimmed blades. The installation of fittings is possible due to the availability of G ¼ thread.


Pricing depends on the delivery kit. Therefore, a unitary heatsink of 180 mm costs 61.95 EUR, dual heatsink of 360 mm comes at 84.95 EUR, and …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 16 January 2012, 03:33
Last visit: 16 January 2012, 03:34