ID-Cooling Hunter Duet II Liquid Cooling System

ID-Cooling, being famous for its cooling systems, has released a Hunter Duet II cooler of large dimensions, which is supposed to transfer heat from the CPU and the graphics engine surfaces. This model is designed with a 360 mm heat sink, which is of great benefit to its efficiency factor.



The construction includes two water units with a base out of copper and built-in pumps, pipes in braided cable, the three-section aluminum 395 × 120 × 27 mm heat sink, three 120 mm fans, and an extraordinary framework with a 90 mm fan to blow over graphics card load-bearing elements and intensive plates for the CPU and GPU.


Though possessing similar construction, water units differ in lids design and the location of holes for liquid flow. At the moment their inner structure details are not available.

A compact fan to blow over VRM consumes 1.2 W. Its rotary speed is not higher than 1,500 rpm. The same ratio of each of the three main fans is not supposed to exceed 1,500–2,000 rpm.

FSP Intros ‘Noiseless’ PSU Model Aurum Xilenser 500

FSP, a renowned developer and supplier of power supply units, introduces a new product that is widely recognized as ‘noiseless’ PSU. Codenamed FSP Aurum Xilenser 500 (AU-500FLD), it employs a passive cooling system instead of an air cooler, thus its dump operation is easily explainable. The unit also characterizes by a startling efficiency which provided for the acceptance of 80+ Gold certificate.



Aurum Xilenser 500 takes similar to Aurum Pro/CM models design with a totally black casing and a comb-like top grid enclosed in a golden stripe. The model is able to operate at the nominal 500W power and support the latest ATX12V/EPS12V standards. It should be noted that this unit utilizes a standard framework with all power connectors soldered on the printed circuit board. A set of connectors involves five SATA connectors, a single 4-contact FDD, four 4-contact Molex, and a pair of 6+2-contact PCI Express connectors. Naturally, it contains two main 24-contact and 4+4-contact …

ViewSonic launches 27 "monitor VX2703mh-LED with a fast matrix

The monitor range of U.S. company ViewSonic is replenished with the product VX2703mh-LED. This is a rather large (27 ") widescreen display on the matrix TN + film, low-latency (3 ms GtG), LED backlight and democratic price tag — U.S. $ 300.



The resolution of 1920x1080 pixels suggests that VX2703mh-LED will be a big pixel. Like many other ViewSonic monitors, a new model has a sleek design. The stand allows adjusting the tilt of the display ranging from -3 ° to 16 °. There are stereo outputs 2x2 W, Mini-Jack socket for headphones and microphone, video input DVI-D, HDMI v1.3 and analog D-Sub. The power of display ranges from 17-23 watts in eco mode, up to 28-36 watts in normal mode. It supports standard mounting VESA 100x100 mm.


Among main characteristics are:

Maximum Contrast Ratio: 1200:1 (20 million to 1 dynamic);

maximum brightness of 300 cd / m ²;

viewing angles: 170 ° horizontal, 160 ° vertical;

screen coating: anti-glare, hardness 3H;

pixel …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 22 November 2012, 13:54
Last visit: 22 November 2012, 14:31