The Introduction of Transparent Chassis from Scythe

Scythe has recently amazed the community by the introduction of absolutely transparent chassis. ACB-Type3 model preserves the cutout of the standard Mid-Tower chassis solutions, but is made of transparent acrylic plates. One more peculiarity of this model is the parallel to the base localization of motherboard. Besides, ACB-Type3 is compatible with motherboards of various form-factor, including mini-ITX, micro-ATX, and ATX.



The motherboard is accommodated on a special tray. Right under this tray the customers are able to find a set of bays designated for the installation of PSU, three 3.5-inch drives, a couple of 2.5-inch drives, and three 5.25-inch drives. The chassis is compatible with CPU coolers of up to 190 mm in height.


At the same time, this model goes without any fans or side panels; this attributes the model to Open-Air segment. The product can content itself with practically noiseless passive system.


Scythe ACB-Type3 is equipped with sufficient number of …

EVGA GeForce GTX 660 Ti

Due to the unknown paparazzi the photos of the upcoming graphics card EVGA GeForce GTX 660 T leaked to the Internet. As it can be seen it is made almost on the reference design of Nvidia. The main differences of EVGA board from the reference — design of the casing of the cooling system, the logo on the fan housing and the clock frequency.



The video card is made on the printed circuit board on the PCI Express 3.0 x16 bus and is equipped with a proprietary dual-slot cooler of active type. Its «heart» is created on 28-nm chip with 1344 GK104 CUDA cores and advanced architecture Kepler. On board there is a 2048 MB of GDDR5 memory with 192-bit and a frequency of 6008 MHz. In fact, core graphics core frequency is 980 MHz, and accelerated by the NVIDIA GPU Boost function value is equal to 1023 MHz.


Dimensions of the cooler are the same as the GeForce GTX 670, but the circuit board is expected to be shorter. It is believed that the card uses the GPU GK104-325-A2 analogically to …

Transcend Launches New mSATA and Half-Slim SATA SSD Solutions

Transcend, a renowned manufacturer of diverse data storage solutions, launches three new SSD models targeting industrial sector. Codenamed MSA740 and MSA630, the two models are developed in mSATA form-factor, while their companion, entitled HSD630, has got half-slim SATA format. In retail sale all three SSD lines are available in several capacity variations. Hence, MSA740 with SATA III 6Gb/sec interface goes with 32 GB, 64 GB and 128 GB capacities; at the same time, MSA630 and HSD630, featuring SATA II 3Gb/sec interface, go with 32 GB and 64 GB capacities only. All three SSD lines are characterized by a proven durability, stability of operation, and low power consumption, combined with an utmost efficiency.



SSD Transcend MSA740 features 29.85x50.8x4 mm dimensions and is equipped with a powerful controller that promotes for the highest speed showings. The maximal sequential Read/Write speed equals to 520/270 MB/sec correspondingly, while the maximal random Read speed (4KB blocks) …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.38
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 31 July 2012, 14:34
Last visit: 31 July 2012, 17:00