The new version of the chassis from Zalman Z9 Plus

The company Zalman continues to utilize the design of the whole successful chassis Z9, releasing a new model Z9 Plus D4-U3. Perhaps, the only difference from the recent Z9 U3 is the lower part of the front panel, made in the form of letter D.

The list of applied characteristics has remained the same. The body is made of steel and plastic in the form factor Mid-Tower. Its dimensions are 504 (L) x 207 (W) x 464 (H) mm, weight — a little over 7 lbs. Inside can be placed the motherboard ATX or microATX, seven cards PCI-E expansion up to 290 mm, ATX-compatible power supply, three optical drives, and seven hard drives, including two SSD 2.5 format.

The set includes two 120-mm fan — in front with the LED-backlit display and on the back without it. On the input-output is a small information display, two USB 3.0 ports and USB 2.0, Mini-Jack connectors for headphones and microphone.

Zalman Z9 Plus D4-U3 will debut in Japan and perhaps in some other markets, August 19 at a …

Sapphire Radeon RX 480 Nitro OC is Available for Preorder

Sapphire is about to launch the first modification of AMD’s graphics adapter – the Radeon RX 480. The new-comer, entitled Radeon RX 480 Nitro OC, is already available for preorder at the price tag of $322. The PCB, as well as the integrated cooling system, employs a modified design. The ‘OC’ postfix implies that the card has been overclocked to provide for a better performance.

Sapphire Radeon RX 480 Nitro OC comes equipped with AMD Polaris 10 GPU (14 nm, FinFet, GCN). It features 2304 stream processors, 32 ROPs & 144 TMUs. The presumptive GPU clock frequency might achieve 1350 MHz. At the same time, memory subsystem hasn’t been modified: 8 GB of GDDR5 are supposed to run at 2.0/8.0 GHz (base/dynamic) frequency.

The 2-slot cooling system employs a few heatpipes, a large aluminum heatsink, a stiffening plate at the reverse side, and a couple of 100-mm fans. The latter are able to operate in passive mode when GPU temperature is low. Moreover, the model boasts the …

MSI is preparing new model - Radeon HD 7970 with a water-block

The well-known in IT-maker Company MSI announced about appearance of new videoadapter based on GPU Tahiti XT chipset. Its diversity from the other Radeon HD 7970 can be seen with the naked eye, instead of an air cooler practically the entire surface of the PCB is covered with waterblock brand EK. It differs markedly from the original version, since it is designed specifically for the MSI R7970 Lightning model. Relation of adapter to the Lightning series is easily determined by the inscription at the interface connector PCI-E 3.0 x16, as well as non-standard set of video outputs (2x DVI, 4x Mini DisplayPort) and configuration of additional power connectors (2x PCI-E Power 8-pin).

Obviously, the accelerator is positioned as the Radeon HD 7970 GHz Edition and has a nominal frequency of at least 1050 MHz. Will MSI risk, like Sapphire did, and provide the card with 6 GB of memory? Probably not. The «advanced» composition of the printed circuit board and water block of full coverage …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 11 June 2012, 22:08
Last visit: 12 June 2012, 12:05