Review of video card ASUS ENGTX560 Ti DC/2DI/1GD5

ASUS ENGTX560 Ti DC/2DI/1GD5 model does not belong to the category of the best among the GeForce GTX 560 Ti, but the product is quite unusual, and deserves some attention. It comes in a big box. Delivery includes: adapter DVI / D-Sub; adapter mini-HDMI/HDMI; two power supply with two 4-pin molex to PCI-E 6-pin; CD with software; instruction. Video card is made in dark colours: PCB and enclosure of cooling system in black. Externally it is very similar to many of other ASUS video cards.



The cooling system is the radiator using three pipes instead of two. Heat pipes have direct contact with the surface of the GPU. They fit tightly in the grooves of the aluminum base. Blowing fan is placed between two raised sections of the radiator. And for a good blow of extreme areas it requires powerful air flow, which means higher fan speed. There is Everflow T129215SU fan with diameter of 92 mm (actual diameter of the blades a little less). The PCB is different from the standard and made in …

The Introduction of Transparent Chassis from Scythe

Scythe has recently amazed the community by the introduction of absolutely transparent chassis. ACB-Type3 model preserves the cutout of the standard Mid-Tower chassis solutions, but is made of transparent acrylic plates. One more peculiarity of this model is the parallel to the base localization of motherboard. Besides, ACB-Type3 is compatible with motherboards of various form-factor, including mini-ITX, micro-ATX, and ATX.



The motherboard is accommodated on a special tray. Right under this tray the customers are able to find a set of bays designated for the installation of PSU, three 3.5-inch drives, a couple of 2.5-inch drives, and three 5.25-inch drives. The chassis is compatible with CPU coolers of up to 190 mm in height.


At the same time, this model goes without any fans or side panels; this attributes the model to Open-Air segment. The product can content itself with practically noiseless passive system.


Scythe ACB-Type3 is equipped with sufficient number of …

ASRock Fatal1ty Z87 Killer: Motherboard for Fastidious Gamers and Overclockers

Hardware solutions from Fatal1ty series have been enjoying great popularity among gamers and overclockers since the first product came out. ASRock continues gladdening its fastidious devotees by introducing one more representative of Fatal1ty series – motherboard Fatal1ty Z87 Killer. It attracts potential customers by a powerful VRM system, prime-quality hardware base, and the implementation of KillerLane 2200 network chip that eliminates lags in online games.



ASRock Fatal1ty Z87 Killer is designed in ATX form-factor and is based on Intel Z87 chipset, targeted Intel Haswell processors (Core i3/i5/i7, Celeron, Pentium) for Socket LGA1150 platform. Memory subsystem supports up to 32 GB of two-channel DDR3 memory chips that run at the maximal 3050 MHz frequency. Power subsystem is organized according to 8-phase scheme; it consists of special MOSFET-transistors that are characterized by a low TDP level.


To continue, this motherboard accommodates three high-speed PCIe 3.0 x16 …
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Gender: Female
Date of birth: 5 July 1987
Location: Indonesia, Ponorogo
Registered at: 04 September 2011, 19:06
Last visit: 04 September 2011, 19:22