Asus Preps H110M-E/M.2 Mainboard with M.2 Socket 3 Support

Asus decided to distinguish itself against the rivals by introducing a motherboard, based on Intel H110 chipset, which boasts a range of integrated facilities. One of such boons is the support for M.2 Socket 3 interface with a bandwidth index of 10 Gb/sec. However, when it operates in SATA mode, one out of four SATA 6 Gb/sec ports is disabled. If PCI-e drive is installed, there will be no restrictions.



Mainboard Asus H110M-E/M.2 supports all modern CPUs from Intel with Socket LGA1151. The PCB accommodates a pair of DIMM slots for the installation of 32 GB DDR4-2133 MHz memory. This micro-ATX board is equipped with a 4-phase Digi+ VRM as well as 5X Protection II protection technology.


The model houses a pair of PCI-e 2.0 x1 expansion slots & a single PCI-e 3.0 x16 slot. Storage subsystem is introduced by one M.2 slot and 4x SATA III ports. Audio subsystem is built on 8-channel Realtek ALC887 controller, whereas network facilities are backed by Realtek RTL8111H controller. …

Xigmatek to Launch Alfar Chassis This Month

Xigmatek is on the verge of launching its new series of chassis, codenamed Alfar. The series consists of three models which differentiate from each other by the color of insertions on the frontal grid (black, white and orange). The casing itself is made of steel and painted totally black. All three enclosures are designed in mid-tower form factor and are ready to accept motherboards of mini-ITX, micro-ATX and ATX dimensions.



Xigmatek Alfar houses seven PCI expansion slots, can accept CPU coolers of up to 160 mm in height, graphics cards of up to 320 mm in length, and a standard power supply unit. The chassis are furnished with three external 5.25-inch drive bays, four internal 2.5-inch bays, and analogous number of bays for 3.5-inch drives. Interface panel is located on the top board and accommodates a couple of USB 3.0 ports and standard 3.5 mm audio sockets.


The nominal delivery set of Xigmatek Alfar contains two 120 mm fans, located on the frontal and rear boards; …

Sapphire Vid-2X Display Expander Review

Display expanders cannot be found in abundance on PC hardware market. In fact, not every user knows what the main purpose of those devices is. In the most general meaning, display expanders are splitters that allow the connection of two monitors towards a single output on a graphics card. However, their destination is not limited by this function only, since it might serve some other means as well. Sapphire introduces its own similar solution in the form of Vid-2X Display Expander model. The manufacturer assures that this splitter differs from traditional couplers in terms of functional and reliability.



Framework


Splitter Sapphire Vid-2X Display Expander is housed in a black plastic casing with gray side plates. The casing's cover is divided in two parts; the spacing between them serves ventilation and heat management means. The base accommodates rubber stands which provide for the framework steadiness. It should be mentioned that Sapphire delivers two models simultaneously …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 28 June 2012, 19:49
Last visit: 28 June 2012, 19:49