Greeting New HIS R7 260 iCooler 1GB GDDR5 Graphics Card

The lineup of graphics cards designed by HIS has been replenished with a new Radeon R7 260 model. Entitled HIS R7 260 iCooler 1GB GDDR5, the new-comer employs a typical PCI Express 3.0 x16 interface and comes with etalon clock frequencies. The R7 260 GPU (GCN, 28 nm) with 768 CUDA cores runs at 1000 MHz. It is accompanied by 1 GB of GDDR5 memory (128-bit bus) that operates at 1500 MHz/ 6000 MHz typical/effective frequency.

This adapter receives power through one 6-contact connector. Connectivity with PC monitors is realized due to three video ports: DisplayPort, HDMI and DVI-I. GPU and memory modules are cooled down by the forces of iCooler. It is not differentiated by an offbeat design; it consists of an aluminum heatsink and one low-profile fan.

Still, it offers acoustic convenience while fulfilling standard tasks: the maximal noise level does not exceed the limit of 28 dB. A supplementary aluminum heatspreader can be found in power supply section.

The HIS R7 260 …

MSI Offers H87I AC Motherboard for Demanding PC Builders

MSI has made a pleasing presentation for all builders and enthusiasts who would like to create a small-sized but highly efficient gaming or multimedia system. The MSI H87I AC is designed in mini-ITX form-factor, featuring 170x170 mm dimensions only. The core of the board is Intel H87 Express chipset that supports all Haswell CPUs with LGA1150 socket. According to the latest data, the model is already available in the European market for approximately 102 EUR.

The H87I AC accommodates two DIMM slots, available for the incorporation of DDR3 modules with the maximal frequency of 1600 MHz. The latter might work in a two-channel mode and reach 16 GB capacity. Disk subsystem is organized by means of four SATA III 6 Gb/sec ports, which allow for the creation of diverse RAID configurations (i.e. 0, 1, 5, 10, AHCI).

Expansion is realized due to a single PCI-e 3.0 x16 connector and one mini-PCI-e (half-size) connector for network modules. Network abilities are supported by one …

Antec Announces Classic P70 PC Case

Antec, a well-known multi-profile hardware designer, is about to release its newest mid-tower case, entitled P70. The model attracts attention by a strict classic design with a solid steel framework, polycarbonate coating, and low noise level. Featuring 458x205x465 mm dimensions, it supports as mini-ITX/micro-ATX mainboards, so full-format ATX ones. The recommended retail price will probably make up $70.

Antec P70 comes with two external 5.25-inch bays, one external 3.5-inch bay as well as four 3.5/2.5-inch internal bays for HDD/SSD. Expansion facilities are backed by seven slots. It should be underlined that all drives and cards might be installed without accessory tools due to the implementation of a tool-free mounting system. With flexibility of application in mind, HDD bays are rotated 90 degrees.

The case is able to accommodate graphics cards of up to 380 mm in length, ATX power supply units, and CPU coolers of up to 170 mm in height. Top I/O panel cannot boast any …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 22 September 2012, 14:40
Last visit: 22 September 2012, 16:18