Antec Announces Classic P70 PC Case

Antec, a well-known multi-profile hardware designer, is about to release its newest mid-tower case, entitled P70. The model attracts attention by a strict classic design with a solid steel framework, polycarbonate coating, and low noise level. Featuring 458x205x465 mm dimensions, it supports as mini-ITX/micro-ATX mainboards, so full-format ATX ones. The recommended retail price will probably make up $70.



Antec P70 comes with two external 5.25-inch bays, one external 3.5-inch bay as well as four 3.5/2.5-inch internal bays for HDD/SSD. Expansion facilities are backed by seven slots. It should be underlined that all drives and cards might be installed without accessory tools due to the implementation of a tool-free mounting system. With flexibility of application in mind, HDD bays are rotated 90 degrees.


The case is able to accommodate graphics cards of up to 380 mm in length, ATX power supply units, and CPU coolers of up to 170 mm in height. Top I/O panel cannot boast any …

Meet a New 4K Monitor from NEC

NEC is going to release one more 24-inch PC monitor but this time with the support for an Ultra HD 4K resolution of 3840x2160 pixels. Entitled MultiSync LCD-EA244UHD-BK, it is characterized by an outstanding visual performance and by a relatively high price tag (approximately $2900). The model doesn’t feature a unique design, however it does have a lot to offer to all potential viewers.



NEC LCD-EA244UHD-BK employs an updated IPS panel, equipped with GB-R backlight. The latter ensures a wider color gamut than traditional W-LED analogues. The panel is specified by 6 ms response time, widest viewing angles (178/178 degrees H/V), 350 cd/m2 brightness, and 1000:1 static contrast. Two in-built speakers (1 W each) provide for a high-quality audio production.


The connection with the video sources might be realized via six video ports: a pair of DVI-D, two DisplayPorts, and a couple of HDMI ports with MHL support. The availability of four USB (v.3.0) ports promotes for the …

The New Fan from Antec – Rainbow 120 RGB – Will Be Available at the Price of 15 EUR

The range of Antec chassis fans has been widened by the Rainbow 120 RGB model. Its name suggests, that this product is of 120 mm typical size. LED backlighting of Rainbow 120 RGB renders up to 256 shades to produce dynamic effects or covers up to seven colours in the static mode. Moreover, the setup chosen by the user is supported after the PC switching off. The backlighting is adjusted just by pushing a little button.



The special blade configuration directs air flow to the outer side, thus increasing the static pressure level and enhancing the process of flows distribution inside the system unit. Fluid bearings extend the service life, and fan rubber pads at the places of mounting holes lower the vibration and noise level.


The top rotational speed of Rainbow 120 RGB is 1,200 rpm, and the air flow capacity equals to 1.2 m3/min. This device possesses a three-pin power supply connector and features the 12 V nominal voltage. The noise factor is not higher than 24.8 dBA.

AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 28 June 2012, 02:41
Last visit: 28 June 2012, 14:16