Enermax Outs High-Flown Twister Pressure Fan

One of the major requirements for an efficient CPU cooler is a high static pressure. The higher this index is, the more productive the blades are. Quite the contrary, the main requirement for a system fan is a volume of produced airflow, since it affects the air circulation within the case. Taking into account those facts, Enermax decided to elaborate a fan that would unite both demands. That is how Twister Pressure fan came into the market.

Enermax Twister Pressure is a high-efficiency fan targeting to be implementing within CPU cooling solutions. It is based on Twister Bearing 2, which framework has been optimized for a reliable operation under unfavorable thermal conditions (up to 85 degrees) and under high dust content. The second version of Twister Bearing is supposed to run over 160.000 hours in fail-proof mode; this is 60% more than the initial version could perform.

To continue, this fan offers three operational modes: Performance, Silent and Ultra Silent. All of …

Cooler Master Releases GX II Power Supply Units

Unveiled earlier this year, the GX II PSU series from Cooler Master has been officially released. The series, targeted primarily at gamers, consists of five models with the power index of 450 W, 550 W, 650 W, 750 W, and 850 W. All the products feature 150x140x86 mm dimensions and are characterized by a non-detachable cable design. Moreover, all the models without exception boast the awarding of 80 Plus Bronze certificate, due high efficiency level of 85% on load.

Cooler Master GX II power supplies fully support Intel Core (Haswell-based) CPUs with APCF scheme. All the units are equipped with a sole +12V bus and support a range of protection functions, including OVP, UVP and SCP. A set of non-detachable cables varies depending on the power efficiency. There is a core set of sockets, consisting of the main 24-contact ATX and a pair of 4-contact EPS sockets; all other sockets differ from model to model (four 6+2-pin, three Molex, and nine SATA sockets).

The incorporation of …

Adata Intros M.2-Type SX8000 Solid-State Drive

Adata keeps on developing its hardware potential. This time the company introduces a lineup of M.2 2280 solid-state drives, targeting gamers & enthusiasts. The XPG SX8000 is based on 3D MLC NAND chips, combined with SMI 2260 controller. The drive employs PCI Express 3.0 x4 external interface and shows a total compatibility with NVMe 1.2 standard.

Adata XPG SX8000 will be available in four capacities: 128 GB, 256 GB, 512 GB & 1 TB. Nonetheless, the company has unveiled performance showings only for the first three models. Thus, the junior model offers 1000/300 MB/sec speed on sequential Read/Write operations (ATTO compression); 1000/300 MB/sec speed on sequential Read/Write operations (CrystalDiskMark uncompressed); 900/280 MB/sec speed on sequential Read/Write operations (AS SSD uncompressed). At the same time, the drive’s random showings make up 45000/75000 IOPS (Read/Write).

To continue, the XPG SX8000 256 GB item features the following efficiency specifications: …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 03 January 2012, 08:50
Last visit: 03 January 2012, 08:50