The Introduction of Transparent Chassis from Scythe

Scythe has recently amazed the community by the introduction of absolutely transparent chassis. ACB-Type3 model preserves the cutout of the standard Mid-Tower chassis solutions, but is made of transparent acrylic plates. One more peculiarity of this model is the parallel to the base localization of motherboard. Besides, ACB-Type3 is compatible with motherboards of various form-factor, including mini-ITX, micro-ATX, and ATX.

The motherboard is accommodated on a special tray. Right under this tray the customers are able to find a set of bays designated for the installation of PSU, three 3.5-inch drives, a couple of 2.5-inch drives, and three 5.25-inch drives. The chassis is compatible with CPU coolers of up to 190 mm in height.

At the same time, this model goes without any fans or side panels; this attributes the model to Open-Air segment. The product can content itself with practically noiseless passive system.

Scythe ACB-Type3 is equipped with sufficient number of …

SilentiumPC Intros Small-Sized Alea M50 Pure Black Chassis

SilentiumPC, an outstanding designer of top-tier cooling systems, comes out to the market with a small-sized PC case – the Alea M50 Pure Black. The new-comer features 410x412x279 mm dimensions and employs high-quality SECC steel as well as ABS-plastic with soft-touch coverage in the framework. The chassis is painted black inside and outside, boasting a fully perforated frontal panel and acrylic windows on both side panels.

SilentiumPC Alea M50 Pure Black is compatible with mini-ITX and micro-ATX mainboards. Its layout consists of a single external bay for 5.25-inch drive, a pair of 2.5-inch and a single 3.5-inch internal bays, accompanied with four PCI slots. Internal spacing is enough to install video cards of 360 mm in length, CPU coolers of 205 mm in height & standard ATX PSUs.

To continue, the top panel of the case accommodates I/O panel with 2x USB 2.0 ports, 1x USB 3.0 port, 2x audio sockets, and a card-reader (SD/SDHC/SDXC form-factors). Cooling system is …

Thermaltake Outs Core P5 Green Edition Chassis

A few months after the release of a chassis with an entirely open-air design, Thermaltake decided to release one more modular solution but with a gaudy exterior. The Core P5 Green Edition boasts bright-green coloring of one of the side plates as well as totally transparent other panels. The middle-tower case features 608x333x570 mm dimensions, similar to its predecessor. Likewise, the greenhorn has received analogous hardware base.

Therefore, Thermaltake Core P5 Green Edition is targeting the installation of mini-ITX, micro-ATX and full ATX motherboards with up to 8 expansion slots. Internal spacing offers 4 slots for 3.5-/2.5-inch drives and allows for the installation of quite long graphics cards (up to 320 mm), high CPU coolers (up to 180 mm) and standard power supply units (up to 200 mm in length).

The chassis might be cooled down by four 120-mm or three 140-mm fans, located on the left-side panel. As an alternative to the air cooling, the user can integrate …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 03 April 2012, 12:36
Last visit: 03 April 2012, 12:36