Cooler for graphics cards Deepcool Dracula

Radiator Deepcool with a frightening name is big and heavy, takes three adjacent PCI-E slots, and is expensive, but the efficiency is worth of consideration. About a year ago, the company Deepcool Industries Co., Ltd. released a cooler for graphics cards with high-sounding name Dracula.



The model has proved very successful, it stood out with very high level of efficiency and, most importantly, it is compatible with many video cards. But during time after release of «Dracula» AMD and NVIDIA have released new video cards, with some of which the cooler is not compatible. In particular, the lower the location of the GPU chip Tahiti requires revision of the cooler and Deepcool was not losing time, releasing a second version of Dracula.


The cooler is packed in a small cardboard box in black with a minimum of information on all sides. In this way Deepcool tried to emphasize cooler belonging to the dark forces and involvement in all the famous vampire of the Romanian …

Meet New Nifty Qs-240 Chassis from Aerocool

The lineup of Aerocool’s chassis has been replenished by a new classy PC case – the Qs-240. The model is designed in mini-tower format targeting micro-ATX or mini-ITX motherboards with maximum of 4 expansion slots. The inventory of external interfaces entails a pair of audio ports, the same number of USB 2.0 ports as well as a single USB 3.0 port.



Internal layout of Aerocool Qs-240 provides for two 3.5-inch drive bays & three 2.5-inch drive bays. Absence of high storage cages allows installing quite lengthy videocards (up to 320 mm) and quite high CPU coolers (up to 160 mm). ATX-compatible power supply unit is to be located in the bottom section of the chassis.


The case comes equipped with one 120-mm fan (rear). In addition, it’s feasible to integrate a pair of top fans and a pair of front ones (all of 120-mm dimensional type) which are accompanied by dust filters. Instead of frontal fans the customer might install 240-mm heatsink that is a part of a liquid cooling …

MSI Releases an Affordable Motherboard of Micro-ATX Form-Factor

Right after the release of FM2-A75MA-P33 motherboard, MSI has taken a decision to design one more model for AMD Trinity platform. Codenamed MSI FM2-A85XMA-E35, a new model is based on a more efficient chipset – AMD A85X. This motherboard is a typical representative of entry-level solutions, though can boast a number of attractive facilities.



MSI FM2-A85XMA-E35 is developed in micro-ATX form-factor for Socket FM2 CPU sockets. The model is known to support AMD A and Athlon II processors. This board accommodates two DIMM slots for the installation of DDR3 memory modules, the overall volume of which can rise up to 32GB. The supported memory operating frequencies might vary: DDR3-1066 MHz, 1333MHz, 1600 MHz, 1866 MHz, and 2133 MHz. Power subsystem features a rather unpretentious framework and consists of five phases; thus, this model isn't intended for overclocking purposes.


Expansion facilities implemented in MSI FM2-A85XMA-E35 can be found in any other entry-level …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 01 September 2012, 11:20
Last visit: 01 September 2012, 12:36