Sapphire Launches Nitro R9 Fury 4G HBM Graphics Card

Sapphire, a well-known manufacturer of top-notch graphics solutions, is glad to announce the launch of a new high-performance video card, entitled Nitro R9 Fury 4G HBM. The greenhorn is available in two modifications which differ by GPU clocks (AMD Radeon R9 Fury). The first version offers 1050 MHz frequency, while the second version runs at 1020 MHz frequency. As a reminder, the etalon Fiji Pro GPU operates at 1000 MHz.



Sapphire Nitro R9 Fury 4G HBM rests upon an improved PCB with an enforced VRM and high-quality hardware base. The card employs 4 GB of GDDR5 memory with 512-bit bandwidth. The list of integrated interfaces consists of three DisplayPort connectors, one HDMI port and one DVI-D port. Moreover, the model is shipped with a proprietary Sapphire TriXX utility that allows for fine tuning of all key parameters.


As distinct from the etalon model, the modified graphics card from Sapphire boasts Tri-X cooler. It embraces three fans on ball bearings and 10-mm …

Point of View strengthens GeForce GTX 680 UltraCharged 4GB of memory

Dutch manufacturer of discrete graphics Point of View considered as a good idea to equip one of the top-end versions GeForce GTX 680 with the prefix UltraCharged with four gigabytes of memory. This graphic card can be a good alternative to existing POV / TGT GTX 680 UltraCharged with 2GB buffer.



The new model, as well as it «precursor», is using the reference design PCB Nvidia with the configuration of additional power connectors PCI-E Power (6 +8)-pin. Typically, the PCB for GeForce GTX 680 is equipped with only four power phases for the GPU, but the version of the UltraCharged Point of View / TGT the fifth one added.


The frequencies remained the same: 1111 MHz for the graphics core (1176 MHz in turbo mode) and 6008 MHz for the 4 GB of memory GDDR5. Under three-slot cooling system, there is GK104 chip in the composition of 1536 shaders and 256-bit memory bus. Point of View marketers emphasize that the graphics processor for the graphics cards GTX 680 UltraCharged …

The Compulab IPC3 Mini-PC with Passive Cooling Goes for 693 USD

One of the latest products by Compulab is an IPC3 mini-PC, intended for industrial and commercial use. The lowest price of the basic model is 693 USD.



Outside dimensions of the framework are 160 х 190 х 40 mm. Due to its exterior construction the case provides overall passive cooling.


There’s a possibility to install 32 GB of RAM, a 2.5” storage drive, an M.2 2260 SSD and a couple of devices with an mSATA connector. The novelty features wireless interface adapters along with two USB 2.0, four USB 3.0, two Gigabit Ethernet, a DisplayPort 1.2, an HDMI 1.4a and an S/PDIF ports. However, special modules will be able to extend this set of connectors.


The Compulab IPC3 Mini-PC operates an Intel Kaby Lake CPU and is protected by the five-year manufacturer warranty.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 25 November 2011, 02:36
Last visit: 25 March 2012, 22:24