ID-Cooling Hunter Duet II Liquid Cooling System

ID-Cooling, being famous for its cooling systems, has released a Hunter Duet II cooler of large dimensions, which is supposed to transfer heat from the CPU and the graphics engine surfaces. This model is designed with a 360 mm heat sink, which is of great benefit to its efficiency factor.



The construction includes two water units with a base out of copper and built-in pumps, pipes in braided cable, the three-section aluminum 395 × 120 × 27 mm heat sink, three 120 mm fans, and an extraordinary framework with a 90 mm fan to blow over graphics card load-bearing elements and intensive plates for the CPU and GPU.


Though possessing similar construction, water units differ in lids design and the location of holes for liquid flow. At the moment their inner structure details are not available.

A compact fan to blow over VRM consumes 1.2 W. Its rotary speed is not higher than 1,500 rpm. The same ratio of each of the three main fans is not supposed to exceed 1,500–2,000 rpm.

FSP Intros ‘Noiseless’ PSU Model Aurum Xilenser 500

FSP, a renowned developer and supplier of power supply units, introduces a new product that is widely recognized as ‘noiseless’ PSU. Codenamed FSP Aurum Xilenser 500 (AU-500FLD), it employs a passive cooling system instead of an air cooler, thus its dump operation is easily explainable. The unit also characterizes by a startling efficiency which provided for the acceptance of 80+ Gold certificate.



Aurum Xilenser 500 takes similar to Aurum Pro/CM models design with a totally black casing and a comb-like top grid enclosed in a golden stripe. The model is able to operate at the nominal 500W power and support the latest ATX12V/EPS12V standards. It should be noted that this unit utilizes a standard framework with all power connectors soldered on the printed circuit board. A set of connectors involves five SATA connectors, a single 4-contact FDD, four 4-contact Molex, and a pair of 6+2-contact PCI Express connectors. Naturally, it contains two main 24-contact and 4+4-contact …

Evga Teases GTX 980 Ti Classified ACX 2.0+ Graphics Card

Evga, one of the leaders in the US market of enthusiast graphics solutions, bedazzled its fans with another videocard, based on GeForce GTX 980 Ti GPU. The GeForce GTX 980 Ti Classified ACX 2.0+ features 150.88x279.4 mm + dual-slot width dimensions. For a better efficiency, it requires a rather mighty PSU (not less than 600 W); the connection to the power supply is organized via two 8-pin PCI Express connectors.



Evga GTX 980 Ti Classified ACX 2.0+ is differentiated by an enforced power supply subsystem that consists of 14+3 phases. The list of other peculiarities includes the availability of dual VGA BIOS chips and the integration of an advanced ACX 2.0+ cooler. It boasts a copper nickel-plated base, a pair of independent heatsink sections (63 + 54 aluminum fins), four 8 mm heatpipes, one 6 mm heatpipe, and a couple of fans. According to the manufacturers, this cooler is by 26% more efficient and by 36% quieter than the etalon model.


The heart of the videocard is the …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 28 September 2012, 02:24
Last visit: 28 September 2012, 02:24