Adata Offers Premier Pro SP920 Drive for Multimedia Data

Adata Technology enters into the market with a new series of SSDs, codenamed Premier Pro SP920. Initially, the customers will be able to acquire only two models of 128 GB and 256 GB capacity, though the manufacturer promises to enlarge the line later on with more spacious drives of 512 GB and 1 TB capacity. All the models feature a conventional 2.5-inch form-factor and are based on Marvell controller, accompanied by multi-level MLC NAND flash-memory.

Solid-state drives Adata Premier Pro SP920 employ SATA III 6 Gb/sec interface. Their design is peculiar by 7 mm depth, thus it will be possible to incorporate them into ultra-slim devices. The availability of a dedicated adapter, as well as a special mounting set, facilitates their installation into the 3.5-inch bays.

In keeping with the developers, these drives are primarily intended to work for the needs of multimedia data, as far as they ensure marvelous performance during Read/Write operations. Therefore, SP920 (depending …

Aresze Unveils New Chassis PureFlow Healthy 7629

Aresze has recently unveiled a unique chassis codenamed PureFlow Healthy 7629. It is primarily characterized by the implementation of up-dated PureFlow technology on fine air. Chassis PureFlow Healthy 7629 is developed in mid-tower form factor and allows for the installation of multi-slot graphics adapters of up to 300 mm in length. PureFlow system is located under a removable frontal lid and presupposes the inclusion of a dedicated switch for the modification of filtering mode.

Internal layout of PureFlow Healthy 7629 is developed with a note of rationality. PSU is localized on the bottom part of the casing, while all cables are managed on the rear part of the motherboard. This speaks of the rational space distribution to provide for a more rational cooling effect. This model is furnished with a single external 5.25-inch bay and a couple of internal bays for 2.5/3.5-inch drives. The upper panel contains a standard set of interface facilities: Power and Reset buttons, filtering …

EK to Start Selling FC7970 Matrix Waterblock in Early March

EK Water Blocks is about to put on sale its VGA waterblock, designed specifically for Asus ROG Matrix HD 7970 graphics card. Codenamed EK-FC7970 Matrix, the product will become available in retail sale already on 8 March and will cost approximately €110. Such price is justified by the utmost heat management facilities that ensure 100% percent reliability.

EK-FC7970 Matrix belongs to the echelon of waterblocks with full coverage. Its base is made of nickel-plated copper, its rear backplate – of anodized aluminum, and its lid – of acetal. The model shows compatibility with all standard fittings of G1/4 dimensional type.

It should be mentioned that EK Water Blocks furnished its new creation with all necessary fastenings, a backplate, and a mounting plate; the latter takes only two slots, unlike a nominal Asus ROG Matrix HD 7970 plate which takes three slots. Such switch of plates will be useful on simultaneous installation of several expansion cards.

This …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 22 March 2011, 15:48
Last visit: 24 March 2011, 22:45