MSI is preparing new model - Radeon HD 7970 with a water-block

The well-known in IT-maker Company MSI announced about appearance of new videoadapter based on GPU Tahiti XT chipset. Its diversity from the other Radeon HD 7970 can be seen with the naked eye, instead of an air cooler practically the entire surface of the PCB is covered with waterblock brand EK. It differs markedly from the original version, since it is designed specifically for the MSI R7970 Lightning model. Relation of adapter to the Lightning series is easily determined by the inscription at the interface connector PCI-E 3.0 x16, as well as non-standard set of video outputs (2x DVI, 4x Mini DisplayPort) and configuration of additional power connectors (2x PCI-E Power 8-pin).

Obviously, the accelerator is positioned as the Radeon HD 7970 GHz Edition and has a nominal frequency of at least 1050 MHz. Will MSI risk, like Sapphire did, and provide the card with 6 GB of memory? Probably not. The «advanced» composition of the printed circuit board and water block of full coverage …

A Triplet of Waterblocks for Titan Z Graphics Solutions from EK Water Blocks

EK Water Blocks, a well-known Slovenian manufacturer of enthusiast-level liquid coolers for GPUs, has just introduced a triplet of waterblocks for the newly arrived Nvidia GeForce GTX Titan Z adapters. The EK-FC Titan Z – Nickel, EK-FC Titan Z – Nickel (Original CSQ) and EK-FC Titan Z – Acetal + Nickel models are sure to provide the maximal cooling at the highest frequencies both for dual- GPUs and memory chips. All the blocks come with a transparent acrylic cover and a lid from POM ACETAL plastic.

EK-FC Titan Z waterblocks are attributed to full-cover solutions. This implies that they efficiently remove heat not only from graphics cores, but also from GDDR5 memory chips, as well as from voltage regulators of VRM subsystem. Areas in direct contact with the GPUs are equipped with micro-channels of 0.7 mm width. The blocks maintain resistance to the coolant stream; hence, they might be employed along with low-power pumps.

The waterblocks features copper nickel-plated …

Corsair Outs ML Series of Fans

Corsair officially launches a new lineup of air fans, entitled ML. The greenhorns are introduced in two form-factors – 120 mm & 140 mm – as well as in three types: ML, ML Pro, ML Pro LED. The first version includes a pair of fans in the kit, the second one supports anti-vibration rubber pads in corners, whereas the third series comes equipped with LED backlight (white, blue or red). Consequently, the price range varies from $24.99 to $39.99.

The key advantage of Corsair ML fans is the incorporation of Magnetic Levitation Bearing. Thanks to magnetic levitation, the fins do not touch the motor, thus eliminating any frictions. This serves for the reduction of noise level and the enhancement of performance.

All 120-mm models rotate at 400-2400 RPM speed; they are supposed to be ideal companions to CPU coolers. At the same time, all 140-mm fans rotate at 400-2000 RPM; they are thought to act perfectly as system fans. On top rotational index the fans produce up to 75-97 CFM …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 05 August 2011, 00:54
Last visit: 05 August 2011, 00:54