APU AMD A10-4600M Review

Intel and AMD companies have established a good reputation for providing efficient hardware solutions for all customer groups. Each new product introduced by the two companies enters the top sales ranks and this promotes for the competition. AMD has recently produced a new APU solution based on Trinity architecture with graphics module VLIW4 and called it AMD A10-4600M. This model can boast the whole spectrum of improvements and advanced features as compared with its predecessor APU Llano, and is intended to beat its rival Intel in efficiency and performance.



Trinity Architecture


CPU Trinity is based on Piledriver micro architecture which superseded Bulldozer from AMD. The distinctive feature of Piledriver is that it’s primarily integrated in a mobile APU. Quad-core Trinity chips utilize two Bulldozer modules, each of which is equipped with two execution cores. Each APU module employs 2 MB of L2 cache, so the entire module architecture approximates to 4 MB of L2 cache; …

Adata Intros M.2-Type SX8000 Solid-State Drive

Adata keeps on developing its hardware potential. This time the company introduces a lineup of M.2 2280 solid-state drives, targeting gamers & enthusiasts. The XPG SX8000 is based on 3D MLC NAND chips, combined with SMI 2260 controller. The drive employs PCI Express 3.0 x4 external interface and shows a total compatibility with NVMe 1.2 standard.



Adata XPG SX8000 will be available in four capacities: 128 GB, 256 GB, 512 GB & 1 TB. Nonetheless, the company has unveiled performance showings only for the first three models. Thus, the junior model offers 1000/300 MB/sec speed on sequential Read/Write operations (ATTO compression); 1000/300 MB/sec speed on sequential Read/Write operations (CrystalDiskMark uncompressed); 900/280 MB/sec speed on sequential Read/Write operations (AS SSD uncompressed). At the same time, the drive’s random showings make up 45000/75000 IOPS (Read/Write).


To continue, the XPG SX8000 256 GB item features the following efficiency specifications: …

ID-Cooling Hunter Duet II Liquid Cooling System

ID-Cooling, being famous for its cooling systems, has released a Hunter Duet II cooler of large dimensions, which is supposed to transfer heat from the CPU and the graphics engine surfaces. This model is designed with a 360 mm heat sink, which is of great benefit to its efficiency factor.



The construction includes two water units with a base out of copper and built-in pumps, pipes in braided cable, the three-section aluminum 395 × 120 × 27 mm heat sink, three 120 mm fans, and an extraordinary framework with a 90 mm fan to blow over graphics card load-bearing elements and intensive plates for the CPU and GPU.


Though possessing similar construction, water units differ in lids design and the location of holes for liquid flow. At the moment their inner structure details are not available.

A compact fan to blow over VRM consumes 1.2 W. Its rotary speed is not higher than 1,500 rpm. The same ratio of each of the three main fans is not supposed to exceed 1,500–2,000 rpm.

AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.43
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 04 September 2012, 23:42
Last visit: 05 September 2012, 00:13