Meet Strike-X Air and Vx Advance Series from Aerocool

Devotees of a futuristic design and uncommon framework cannot but revel in the launch of new chassis Strike-X Air from Aerocool developers. The long-awaited product is already in the market, as well as new Vx Advance series. Chassis Strike-X Air is distinguished by the ultra-original design and open-end framework type. According to the words of Aerocool representatives, the major emphasis has been made on the handiness of usage so that each person could have a direct access to any component of the chassis.

The chassis of Strike-X Air is made of steel and supports motherboards of Micro ATX, E-ATX and ATX dimension type, and graphics cards of 330 mm. length. Expansion cards and interface panels are installed due to the ten slots in the rear part of the device. The chassis is equipped with three external modules of 5.25 and 3.5 inches type. The clipboard is intended for a single USB 3.0 socket, three USB 2.0 sockets, and a couple of 3.5 mm. sockets for headsets with a microphone. … …

Graphics Adapter Gigabyte GeForce GTX 650 Ti Boost with Modified Frequencies

Taking the lead from a number of Nvidia’s partners, Gigabyte has launched its own sample piece of GeForce GTX 650 Ti Boost graphics adapter. It is differentiated primarily by modified GPU and memory frequencies, as well as by an improved PCB design. The latter employs Ultra Durable 2 technology that stipulates the implementation of high-quality hardware components, including ferrite chokes, solid-state capacitors, and Low RDS Mosfets transistors with reduced resistance on mode changes.

Gigabyte GeForce GTX 650 Ti Boost is based on GK106 GPU, developed under 28 nm technological process. Its nominal frequency has been increased from the reference 980 MHz to 1033 MHz, while its dynamic frequency has been changed from 1032 MHz to 1098 MHz. This graphics adapter is furnished with 1 GB of GDDR5 memory, which clock frequencies have been, vice versa, lowered: nominal index dropped from 1502 MHz to 1250 MHz, dynamic index dropped from 6008 MHz to 5000 MHz.

This model employs …

The new version of the chassis from Zalman Z9 Plus

The company Zalman continues to utilize the design of the whole successful chassis Z9, releasing a new model Z9 Plus D4-U3. Perhaps, the only difference from the recent Z9 U3 is the lower part of the front panel, made in the form of letter D.

The list of applied characteristics has remained the same. The body is made of steel and plastic in the form factor Mid-Tower. Its dimensions are 504 (L) x 207 (W) x 464 (H) mm, weight — a little over 7 lbs. Inside can be placed the motherboard ATX or microATX, seven cards PCI-E expansion up to 290 mm, ATX-compatible power supply, three optical drives, and seven hard drives, including two SSD 2.5 format.

The set includes two 120-mm fan — in front with the LED-backlit display and on the back without it. On the input-output is a small information display, two USB 3.0 ports and USB 2.0, Mini-Jack connectors for headphones and microphone.

Zalman Z9 Plus D4-U3 will debut in Japan and perhaps in some other markets, August 19 at a …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 08 September 2011, 21:44
Last visit: 29 October 2013, 14:44