Crucial Showcases Voluminous MX300 Solid-State Drives

Crucial is about to launch a new series of voluminous SSDs, entitled MX300. The lineup consists of 2.5-inch models with thin cases (7 mm only), targeting as desktop so mobile platforms. Additionally, the delivery set offers a dedicated 2.5-inch frame for the installation into a 9.5-inch bay. The capacity of drives makes up 275 GB, 525 GB, 750 GB, 1 TB, and 2 TB.

SSDs Crucial MX300 is developed on 32-layer Micron 3D NAND TLC chips (48 GB) as well as Marvell 88SS1074 controller. Data transfer process is realized via SATA III (6 Gb/sec) interface. The maximal sequential Read/Write speed equals to 530 MB/sec/510 MB/sec. In its turn, the maximal random data transfer index approximates 83.000/92.000 IOPS (Read/Write).

The greenhorns are thought to support the following technologies: AES, ECC, T.R.I.M., Data Path Protection, S.M.A.R.T., Active Garbage Collection, Power Loss Prevention, and Extreme Energy Efficiency. Besides, Dynamic Write Acceleration identifies and writes the …

Biostar Announces Budget-Oriented H110MD PRO Mainboard

Biostar has replenished its PRO series of motherboards with a budget-friendly model – H110MD PRO. The greenhorn is based on Intel H110 chipset compatible with Intel Skylake Socket LGA 1151 CPUs. As far as this micro-ATX board is an entry-level solution, it offers just basic facilities, including 5-phase VRM, a pair of DIMM slots for DDR3L-1600 MHz modules (maximal capacity – 16 GB).

Biostar H110MD PRO accommodates four SATA III (6 Gb/sec) ports for storage devices, one PCI Express 3.0 x16 slot (for graphics adapter) and a pair of PCI Express 2.0 x1 slots for expansion cards. Network possibilities are ensured by means of gigabit Realtek RTL8111G controller.

The I/O panel boasts the availability of two PS/2 ports, two video ports (D-SUB and DVI-D), one RJ-45 port, three audio sockets, and four USB ports (2x USB 2.0, 2x USB 3.0). Additionally, the motherboard supports a range of advanced features, such as Biostar Flash, BIO-Flasher, BIO-Relife, Watch Dog, e-HotLine, BIOS …

Palit Intros GeForce GTX 750 KalmX Graphics Card

Palit, one of the world largest manufacturers of graphics cards, came up to the market with one more edition to the GeForce GTX 750 series – the GeForce GTX 750 KalmX. The model employs etalon PCB with PCIe 3.0 x16 interface and a two-slot passive cooling system. The latter accommodates a massive nickel-plated heatsink, consisting of 43 thin fins, and two heatpipes that connect the heatsink with a copper base. The unique model is already available in German online-stores for 114.9 EUR.

Plait GeForce GTX 750 KalmX is geared up by GM107-300 GPU (28 nm, Maxwell architecture) with 512 CUDA cores. Its base/efficient clock frequency makes up 1020 MHz/1185 MHz. The chip is accompanied by 2 GB of GDDR5 memory with 128-bit interface; its operational clock frequency approximates 5010 MHz.

The list of external interfaces, which are located on the rear panel, includes a couple of DVI ports and a single mini-HDMI port. One should take into consideration that the card is void of an …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 26 November 2011, 09:12
Last visit: 26 November 2011, 09:24