Preliminary Acquaintance with VGA-Cooler MK-26 V2 from Prolimatech

Prolimatech Inc., an established manufacturer of high-end air-cooling systems, is about to release its new VGA-cooler, codenamed MK-26 V2. The upcoming product will be compatible with graphics cards from AMD manufacturer (up to Radeon HD 7000 Series) and Nvidia (up to GeForce GTX 600 Series). According to the preliminary data, the new cooler models will be capable to manage up to 320W of extra heat to provide for the most optimal GPU cooling down.

The major distinction of MK-26 V2 cooler is its impressive dimensions which equal to 230x146x47 mm. Thus, the cooler will take the spacing of five expansion slots, leaving no room for SLI/Crossfire. The cooler has got a copper base which accommodates six copper heatpipes, 6mm in gauge each pipe. Those pipes pierce two heterogeneous blocks consisting of thin aluminum fins which are designed in correspondence with Buckle Fin technology. The fins are distinguished by the unusual form that is called to promote for better heat removal …

Meeting New Gaming Memory Kits AMD Radeon RG2133

A couple of days ago AMD introduced a new series of DDR3 memory kits within the boundaries of AMD Unified Gaming Strategy development. Codenamed AMD Radeon RG2133, the new-comers are available in two- and four-channel kits, the overall capacity of which equals to 16 GB and 32 GB correspondingly. The most striking feature is that they can be employed as on AMD, so on Intel platforms, supporting AMD AMP and Intel XMP technologies for improved settings optimization.

The other peculiarity is that these memory kits run at 2133 MHz frequency. On such conditions there is always a chance to dramatically increase the system performance up to 22% (with APU AMD A10 on board). Herewith, voltage index equals to 1.65 V, while latency index looks the following way: 10-11-11-30. Memory chips are cooled down by the forces of a high-quality aluminum heatspreader. Its design is called to ensure a stable operation in response to the increased frequencies.

There is one more advantageous …

Deepcool Announces a Pair of Maelstrom Liquid Coolers

Deepcool has extended Maelstrom lineup of liquid coolers with two new models – the 120T and the 240T. The key distinction between the pair is the amount of 120 mm fans employed (one or two). Both come equipped with red LED backlights and show compatibility with the majority of update Intel & AMD platforms. The maximal supported CPU TDP level makes up 140/150 W.

Deepcool Maelstrom 120T comes with a single fan, whereas its companion, 240T, features a couple of fans, based on fluid bearing with 50.000 hours MTBF. The units run at 1800 RPM, creating up to 83.64/167.28 CFM and 17-34 dB of noise (depending on the model).

Both coolers employ a ceramic pump (70x85.6x31.5 mm), estimated for 120.000 hours of fail-proof operation & running at 2400 RPM. The pump features a copper base with micro-channels, connected with solid rubber hoses and an aluminum heatsink. The new-comers are linked to the system by means of 4-pin connectors.
device drivers
Download (9MB)
DevID agent v4.38
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Gender: Female
Registered at: 10 October 2012, 11:12
Last visit: 10 October 2012, 14:27