ID-Cooling Hunter Duet II Liquid Cooling System

ID-Cooling, being famous for its cooling systems, has released a Hunter Duet II cooler of large dimensions, which is supposed to transfer heat from the CPU and the graphics engine surfaces. This model is designed with a 360 mm heat sink, which is of great benefit to its efficiency factor.



The construction includes two water units with a base out of copper and built-in pumps, pipes in braided cable, the three-section aluminum 395 × 120 × 27 mm heat sink, three 120 mm fans, and an extraordinary framework with a 90 mm fan to blow over graphics card load-bearing elements and intensive plates for the CPU and GPU.


Though possessing similar construction, water units differ in lids design and the location of holes for liquid flow. At the moment their inner structure details are not available.

A compact fan to blow over VRM consumes 1.2 W. Its rotary speed is not higher than 1,500 rpm. The same ratio of each of the three main fans is not supposed to exceed 1,500–2,000 rpm.

HIS Adds 7770 iCooler to Its Graphics Cards Arsenal

A new graphics card of an average efficiency has appeared in the arsenal of HIS manufacturers. Codenamed HIS 7770 iCooler (H777FN1G), the card is targeted those gamers who would like to receive a dual effect: the possibility to play all up-dated games and to satisfy all other graphics requirements for a reasonable price.



Model 7770 iCooler is based on AMD Cape Verde TX GPU, developed under 28 nm technological process and built on Graphics Core Next micro-architecture. It involves ten computing blocks and 640 current processors. The processing unit is expected to operate at the reference 1000 MHz clock frequency. The integrated GPU is accompanied by 1GB of GDDR5 memory which employs 128 bus; its nominal clock frequency starts at 1125MHz, while its effective frequency might achieve the margin of 4500MHz.


HIS 7770 iCooler employs PCI Express 3.0 x16 internal interface. A set of external video interfaces consists of HDMI, D-Sub and Dual-DVI ports that are able to ensure the …

The Upcoming Release of Canvio Desk HDD from Toshiba

Toshiba Corporation is about to release a new external HDD series with USB 3.0 interface, codenamed Canvio Desk. Such information has been voiced by the company's press-service. The new series is represented by HDDs of 1TB, 2TB and 3TB volume capacities. One of the major peculiarities ascribed to Canvio Desk models is their compact dimensions; at the same time, these HDDs are able to offer huge capacity and stability of operation.



Toshiba Canvio Desk is delivered in black casing and provides for double localization on a desk. This HDD can be located as vertically so horizontally to ensure the utmost convenience of utilization. The other peculiarity of Canvio Desk drives is the availability of fanless passive cooling system. The implemented USB 3.0 interface is destined to ameliorate all attached operations, starting from data transfer and finishing with backup activity time.


To continue, the manufacturer has taken care of its HDDs' advanced efficiency by delivering the …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 26 August 2012, 23:01
Last visit: 27 August 2012, 02:46