Sapphire Introduces Edgy R9 290 Vapor-X OC Graphics Card

Sapphire Technology Ltd., the first-string supplier of graphics cards based on AMD chips, introduces its proprietary version of Radeon R9 290 adapter – R9 290 Vapor-X OC. As seen from the title, the model features an original Vapor-X cooler with three low-noise fans and has received factory overclocking. Bright design and outstanding performance makes this card a desirable acquirement for enthusiasts and overclockers.



Sapphire R9 290 Vapor-X OC is based on Hawaii PRO GPU (28 nm, GCN architecture) with 2560 stream processors. It runs at 1030 MHz frequency. The chip is accompanied by 4 GB of GDDR5 memory (512-bit interface) that operates at 5600 MHz effective frequency. The card is developed for PCI Express 3.0 x16 rail and is powered through a pair of sockets: 1x 8-pin and 1x 6-pin.


The award-winning Vapor-X cooler consists of an evaporator and five heatpipes. The main heat-pipe features 10 mm diameter, two other – 8 mm, and the last two – 6 mm. This combination is …

ASRock Introduces Its Upgraded DeskMini PCs

The ASRock Co. has brought to the CES 2017 event its upgraded RX and GTX lines DeskMini PCs.



Details are obscure; however, general info is available. It is known, for example, that the dimensions of these devices are 210 х 137.5 х 81.9 mm. The motherboards utilized are of Mini-STX form factor, and the supposed CPUs are of the Kaby Lake generation.


The highest RAM capacity of these models equals to 32 GB; and there’s a possibility to embed drives due to the 2 SATA connectors and 3 M.2 slots. Such ports as USB 3.0 (x3), USB 2.0 (x2), HDMI (x2), DisplayPort, Mini DisplayPort, Thunderbolt 3 and Gigabit Ethernet deliver extra convenience.


These novelties can be equipped with either GeForce GTX 1060 or Radeon RX 460, RX 470, RX 480 (MXM) graphics cards. At the same time, the TDP rate should not exceed 120 W.


Therefore, we can assume that ASRock will produce fully gaming and rather effective VR compatible compact PCs.

SilverStone Comes Out with Precision PS12 Chassis

The lineup of tower cases developed by SilverStone has been replenished by a new price-efficient solution, entitled Precision PS12. The model features 405x360x170 mm dimensions and is ready to accommodate small-sized motherboards (mini-ITX, micro-ATX) as well as four expansion cards. The chassis is made of high-quality plastic, supplemented by a fine-meshed metallic grid on the front panel.



Inside, there is a single rack for the installation of optical drives; it’s estimated for two 5.25-inch units. There is also space for 4x 3.5-inch drives and 1x 2.5-inch drive. Hence, there is little space for graphics adapters, the length of which should not exceed 358 mm. The layout is intended for 140-mm high CPU coolers & standard ATX PS/2 power supply units.


SilverStone Precision PS12 is shipped with a single preinstalled 120-mm fan (front panel). Additionally, it’s possible to include one 80-mm fan (front panel) and one 80-/92-mm fan (rear panel). Pricing is set at $45.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 03 September 2012, 10:46
Last visit: 03 September 2012, 20:45