A Super Slim 27” Display from Dell

Welcome the next novelty from Dell – a thin S2718D QHD display, the edge of which is 6.9 mm only.



Ensuring the brightness level of 400 nits and a 1000:1 contrast ratio, this monitor renders 99 % of the sRGB colour gamut. Its response time equals to 6 ms and its viewing angle is 178 degrees.


The S2718D model with the 2,560 x 1,440 pixels resolution, a 60 Hz refresh rate and an IPS panel offers the handy USB Type-C connectivity, HDMI 2.0, as well as an audio line-out for an amplifier or a speaker utilizing. This product cannot be mounted onto the wall, though this fact is surpassed by the presence of the 45 W USB C connector, providing a possibility of charging laptops, which support this type of charging.


The expected price of the S2718D display is 699 USD.

Zotac to Release Low-Profile Version of GeForce GTX 650 Adapter

In September Zotac introduced its own version of GeForce GTX 650 graphics adapter. Now, after two months, the company announces its intentions to release a low-profile version of this adapter. Moreover, Zotac decided not to lose time on inventing an appropriate name for its card, but simply added the attribute LP (low-profile) to the existing name. Quite modest dimensions and lack of an additional power supply socket are not peculiar to adapters from GeForce GTX series, but Zotac is not embarrassed by this fact.



Graphics card Zotac GeForce GTX 650 LP is based on GK107 chip with 385 CUDA cores, developed on Kepler architecture (28 nm process). Due to its compact dimensions, it can be integrated into small-sized chassis of HTPC system. Despite the small PCB width, the card takes two expansion slots within the casing, since the height of cooler achieves the measure of 35-40 mm. The card's inventory includes 1024 MB GDDR5 memory with 128 bit interface, 32 texture blocks, and 16 …

Computer Case be quiet! Silent Base 600 Overview (Part II)

Internal structure

The motherboard compartment is located above the power supply unit. In this regard, everything is quite standard for a Mid Tower class. A large cutout is made in a tray behind a CPU socket, to allow installation of a CPU cooling system directly into the case; a backplate mount (thrust-pad located on the back side of the motherboard) is used for this purpose.


The four large slots in a tray, equipped with the silicone membrane, are designed for proper cable management which looks very promising here. Plugs of expansion slots are attached by thumbscrews. The front part holds a hard disks’ basket for three drives.


At the back side a slot in a tray can be clearly seen to access cable management system slot. Also, the rear side contains two tool kits for installation of solid-state drives and size 2.5" hard disks.


The side cover is made of 0.7 mm steel, and from the inside has a thick vibration and noise absorbing coating. The recess in the …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 21 January 2012, 20:40
Last visit: 21 January 2012, 20:40